Voltage - Output 3:	--
Control Features:	Enable, Active Low
Size / Dimension:	1.25" L x 0.80" W x 0.40" H (31.8mm x 20.3mm x 10.2mm)
Package / Case:	24-DIP Module, 5 Leads
Mounting Type:	Through Hole
Efficiency:	84%
Operating Temperature:	-40°C ~ 105°C
Features:	Remote On/Off, OCP, OVP, SCP, UVLO
Applications:	ITE (Commercial), Medical
Voltage - Isolation:	5.0kV
Power (Watts):	10W
Current - Output (Max):	2A
Series:	REM10
Voltage - Output 2:	--
Voltage - Output 1:	5V
Voltage - Input (Max):	36V
Voltage - Input (Min):	9V
Number of Outputs:	1
Type:	Isolated Module
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC Converters

DC to DC converters, also known as DC DC power supplies, are devices used to convert DC power from one form of electrical energy to another. These converters are primarily used to convert a high voltage DC input power into a lower voltage DC output power. To achieve this conversion, DC to DC converters are employed in a variety of applications, but there are some differences in their designs depending on the output voltage requirement and application of the output power.REM10-2405SW/A is a type of DC to DC converter primarily used in industrial and telecommunications applications. It provides a regulated output voltage from a wide input range of 3.6 to 24VDC. The maximum output power of this converter is 25 watts and it features soft-start, current limiting, and overvoltage protection.The REM10-2405SW/A features a PWM buck-type architecture which means that the input voltage is bucked down using a series of transistors. This design is a type of switch-mode power supply because the power is switched on and off rapidly. This PWM control is what enables the output voltage to remain very stable, even when the input voltage changes. The PWM converter also improves overall efficiency, since it runs at a higher frequency than a linear DC supply.The operation of this DC to DC converter is quite simple and begins with the input voltage being supplied to the converter. This voltage is then monitored by the power control chip, which uses the PWM control to vary the duty cycle of the switching transistors. The switch-mode transistor then buck the input voltage to the correct output level. An onboard regulator then ensures that the output voltage remains very stable.The REM10-2405SW/A is a highly efficient converter which has been designed for applications that require a high degree of accuracy and reliability in the output voltage. It has a wide input and output voltage ranging from 3.6 to 24VDC. The onboard power control chip allows it to maintain stable output voltage even when the input voltage changes. The converter is highly efficient and features overvoltage protection and current limiting. This makes it perfect for applications that require precise control of the output voltage.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description