RF062PJ133CS

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF062PJ133CS is a part of the Resistor Networks, Arrays category. It is an Surface Mount Thick Film Resistor Network with 2 Resistors per element. This type of resistor network is a type of resistive device that is used in applications that require different elements to be connected in a chain. The resistive device is composed of two or more resistors connected in series or parallel configuration.

A resistor network is composed of two or more discrete resistors that are connected electrically. Each resistor will have one end of the chain connected to a ground or a positive power supply and the other end connected to the positive side of the power supply. The purpose of the resistor network is to control the voltage or current of the power supply. This will allow applications to be powered from various sources and also allow the applications to be connected and powered at the same time.

The RF062PJ133CS is made of thick film resistors, which means that the resistors have been manufactured in a process where the resistive element is deposited on the surface of a substrate, such as a ceramic substrate. This type of deposition gives the resistors greater stability and durability, allowing them to be used in higher power applications.

The RF062PJ133CS resistor network is rated for 6.2 kOhm resistance at 4 x 0.5A, and the operating temperature range for this resistor network is - 55°C to 125°C. This combination of resistance and operating temperature range make this resistor network well suited for a variety of applications. This resistor network is typically used in power supplies, amplifier circuits, and motor control circuits.

The working principle of the RF062PJ133CS resistor network can be understood by looking at how electricity flows through it. To understand how electricity flows through a resistor network, it is important to understand the concepts of current and voltage. Voltage can be thought of as an electrical potential energy, and current is the flow of electrical charge.

To understand how electricity flows through the RF062PJ133CS resistor network, it is important to understand ohm’s law. Ohm’s law states that voltage is equal to current multiplied by resistance. This means that the voltage applied to the resistor network is divided among the resistors according to the resistance of each. The total voltage and current through the resistor network will be the same as the voltage and current applied to the network.

This resistor network is also used to control the current through an application. The resistor network can be used to limit the current going through an application by setting the resistance properly. By lowering the resistance, more current can flow through the application, and by raising the resistance, less current can flow through the application. In this way, the resistor network can be used to adjust the current on an application.

The RF062PJ133CS resistor network is an excellent device to use for applications that require a precise amount of current. The resistor network is very reliable and can provide the necessary protection for the application. With its wide operating temperature range and high power handling capability, the RF062PJ133CS resistor network is an ideal device for a variety of applications.

The specific data is subject to PDF, and the above content is for reference