Allicdata Part #: | RFU5TF6S-ND |
Manufacturer Part#: |
RFU5TF6S |
Price: | $ 1.02 |
Product Category: | Discrete Semiconductor Products |
Manufacturer: | ROHM Semiconductor |
Short Description: | DIODE GEN PURP 600V 5A TO220NFM |
More Detail: | Diode Standard 600V 5A Through Hole TO-220NFM |
DataSheet: | RFU5TF6S Datasheet/PDF |
Quantity: | 755 |
1 +: | $ 0.91980 |
10 +: | $ 0.81207 |
100 +: | $ 0.64178 |
500 +: | $ 0.49771 |
1000 +: | $ 0.39293 |
Series: | -- |
Packaging: | Tube |
Part Status: | Not For New Designs |
Diode Type: | Standard |
Voltage - DC Reverse (Vr) (Max): | 600V |
Current - Average Rectified (Io): | 5A |
Voltage - Forward (Vf) (Max) @ If: | 2.8V @ 5A |
Speed: | Fast Recovery = 200mA (Io) |
Reverse Recovery Time (trr): | 25ns |
Current - Reverse Leakage @ Vr: | 10µA @ 600V |
Capacitance @ Vr, F: | -- |
Mounting Type: | Through Hole |
Package / Case: | TO-220-2 Full Pack |
Supplier Device Package: | TO-220NFM |
Operating Temperature - Junction: | 150°C (Max) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
RFU5TF6S application field and working principle
RFU5TF6S is a type of single phase rectifier, which refers to the one-way rectification of AC voltage. Since it is a kind of unidirectional device, it can be used in various applications such as power distribution, lighting, and motor control. This article will discuss its application field and working principle.
Application field of RFU5TF6S rectifier
RFU5TF6S is superior in its high efficiency, low temperature rise and low ripple current. It is widely used in various applications:
- Power distribution: Used in power transmission and distribution systems, and can be regarded as an ideal power supply rectifying device.
- Lighting: Installed in the circuit to convert alternating current (AC) into direct current (DC), driving and controlling lighting.
- Motor control: Used in industrial motor control circuits to convert AC into DC and control the speed of the motor.
- DC power supply: Can be used as a DC power supply with a rectifying filter circuit.
- Other applications: Used in welding machines, electronic control systems, UPS systems and more.
These are just some of the possible applications of the RFU5TF6S rectifier. It has a wide range of uses owing to its high efficiency, low temperature rise and low ripple current.
Working principle of the RFU5TF6S rectifier
The working principle of the RFU5TF6S rectifier is mainly based on the rectifying principle of a diode. The basic circuit of a single phase rectifier is as follows:
The circuit diagram above shows an AC power supply, a diode bridge rectifier, a filter capacitor and a load. The AC power supply provides an alternating voltage with a frequency of 50Hz or 60Hz. This AC voltage is then sent to the diode bridge rectifier, which consists of four diodes - two for the positive cycle of the voltage, and two for the negative cycle. Since the two positive and two negative diodes form a bridge, the AC voltage is rectified before it is then sent to the filter capacitor.
The filter capacitor catches any AC voltage,regulates it and prevents it from reaching the load while letting the DC voltage pass through. The load is then connected to the filter capacitor, thus getting a direct current.
The RFU5TF6S rectifier is a type of single phase full-wave rectifier which consists of two diodes, a single element capacitor and a load. When a single-phase AC voltage is applied to the RFU5TF6S rectifier, it will be converted into a direct current by the rectifying action of the two diodes. This direct current will then be filtered by the capacitor, after which it will be sent to the load.
The single-phase rectifier with two diodes is superior to the full-wave rectifier with four diodes, as the capacitor can be omitted in the latter, resulting in a more cost-effective solution.
Conclusion
In conclusion, the RFU5TF6S is a type of single phase full-wave rectifier with two diodes. It is a highly efficient, low temperature rise and low ripple current device, making it suitable for various applications, including power distribution, lighting, motor control and DC power supply. It works by converting the AC voltage supplied to it into a DC voltage through the rectifying action of its two diodes, and then filtering it through a capacitor before sending it to the load.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
RFU5TF6S | ROHM Semicon... | 1.02 $ | 755 | DIODE GEN PURP 600V 5A TO... |
Diodes - General Purpose, Power, Switchi...
DIODE SCHOTTKY 40V 500MA SC76Diode Schot...
DIODE GEN PURPOSE DO-204ALDiode
DIODE GEN PURP 400V 1A DO41Diode Standar...
DIODE SCHOTTKY 20V 1A DIE 1=400Diode Sch...
DIODE GEN PURP 400V 500MA D5ADiode Stand...