RGC1A60A25KKE

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction: The RGC1A60A25KKE is a high voltage contactor produced by RC Components. It is a type of solid-state contactor, or SSR, and is rated for use in high voltage applications. As its name suggests, the RGC1A60A25KKE is designed for use in residential, commercial, industrial, and marine applications, where high voltage currents of up to 60 amps are needed.

Uses: The RGC1A60A25KKE is highly versatile, making it suitable for many types of applications. It can be used in both small and large high voltage applications, such as in the power distribution of industrial equipment, commercial lighting fixtures, HVAC and refrigeration systems, and water pumps. It is also commonly used in residential installations, ranging from simple outlets to ceiling fans and air conditioners. The contactor is suitable for use in both indoor and outdoor conditions, and is even rated for marine use.

Working Principle: The RGC1A60A25KKE is a solid-state contactor, a type of switch that utilizes semiconductor control of an electrical load in place of a traditional mechanical contactor. The contactor works by utilizing power semiconductors called \'silicon-controlled rectifiers\' (SCRs) to control the application of electric current. The SCRs are connected in series with the load, the power supply, and a \'gate\' for controlling the SCRs. When the gate is charged, electricity flows in a closed circuit to the load, allowing the electrical device to start functioning. When the gate is discharged, the SCRs will no longer conduct electricity, and the load will be powered down.

Construction and Mechanical Requirements: The RGC1A60A25KKE is constructed out of a polycarbonate / glass-filled thermoplastic housing, specifically designed to be corrosion-resistant. Additionally, the contactor is fitted with a double-break single-coil design, which prevents arcing or sparking during operation, and thus reduces the chances of short-circuits or fires. The contactor also contains an overload protection mechanism, which uses temperature sensors to monitor the current load and trip the contactor if the load exceeds a pre-set limit, ensuring safe operation.

Limitations: The RGC1A60A25KKE is not suitable for use in applications with alternating current (AC) power. Additionally, it is designed to be used only with insulated wires, and may not be used with bare wires. Further, due to its size and the current ratings, the RGC1A60A25KKE is likely too large and too powerful for certain smaller or lighter duty applications.

Conclusion: The RGC1A60A25KKE is a high voltage contactor that is versatile and suitable for a wide range of residential, commercial, and industrial applications. It utilizes a solid-state contactor design, with power semiconductor components controlling the flow of electricity to the load. The contactor is constructed with a polycarbonate housing, designed to be resistant to corrosion and to reduce sparking and arcing. It has an overload protection mechanism, and is rated for use with up to 60 amps of current. While the contactor has several benefits, it is not suitable for use with alternating current or bare wires.

The specific data is subject to PDF, and the above content is for reference