RM064PJ363CS

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor networks and arrays are useful components in modern electronic circuit designs. The RM064PJ363CS is a 4-resistive network with a Kelvin connection and signal conditioning library in a surface mount SOT-23-5 package, commonly found in Systems-on-Chip (SoC) design. The component provides a Non-Volatile Memory (NVM) port, allowing the user to easily store their settings in the device.

The RM064PJ363CS is a four-resistive network, constructed around a true Kelvin connection. This differs from a conventional four-resistor network as the two current bearing connections, are not connected to ground. This ensures that measurements can be taken without having to measure the ground connection leakage resistance. The component also provides signal conditioning, for the purpose of filtering and protecting the input signal from interference.

When looking at the application of the RM064PJ363CS, it can be used for a wide range of input signals. It can be used for amplifiers and signal conditioning, high speed serial communication, or for any type of signal conditioning requiring a single resistor or shunt path. It can also be used for multi-drop systems, such as I2C and SPI, where a bit of extra conditioning is needed to protect the signal. As a result, the RM064PJ363CS is a highly versatile component, with a wide range of applications in almost any circuit.

The working principle of the RM064PJ363CS is based on its Kelvin connection and signal conditioning circuitry. The Kelvin connection is made up of two resistors, which are connected in series to form a voltage divider. This is then connected to the ground and the input signal source, forming a total impedance of the two resistors. This impedance can be changed by adjusting the value of one of the two resistors, and this is what the RM064PJ363CS does. By changing the value of the resistors, the user can influence the total impedance and the overall impedance is then filtered by the signal conditioning circuitry. The signal conditioning circuitry is designed to provide both low and high pass filtering, with cut-off frequencies that can be adjusted by the user.

In summary, the RM064PJ363CS is a 4-resistive network with a Kelvin connection and a signal conditioning library in a surface mount SOT-23-5 package, widely used in System-on-Chip (SoC) designs. It can be used for a wide range of input signals, such as amplifiers and signal conditioning, high speed serial communication, multi-drop systems, and any signal conditioning requiring a single resistor or shunt pass. The working principles of the RM064PJ363CS are simple and straightforward. It uses its Kelvin connection and signal conditioning circuitry to provide effective filtering and impedance adjustment, which can be adjusted depending on the application.

The specific data is subject to PDF, and the above content is for reference