RMB2S RCG Discrete Semiconductor Products

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Active
Diode Type:	Single Phase
Technology:	Standard
Voltage - Peak Reverse (Max):	200V
Current - Average Rectified (Io):	800mA
Voltage - Forward (Vf) (Max) @ If:	1V @ 2A
Current - Reverse Leakage @ Vr:	5µA @ 200V
Operating Temperature:	-55°C ~ 150°C (TJ)
Mounting Type:	Surface Mount
Package / Case:	4-BESOP (0.173", 4.40mm Width)
Supplier Device Package:	MBS

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

A bridge rectifier is an electrical circuit comprised of diodes configured together in a bridge-like circuit structure. This enables AC power to be converted into DC power utilizing the characteristics of diodes, as diodes are two-terminal electrical components that allow the flow of electrical current in only one direction. The main purpose of a bridge rectifier is to convert alternating current (AC) into direct current (DC).

Types of Bridge Rectifiers

Bridge rectifiers may be classified into different types including full wave bridge rectifiers, half-wave bridge rectifiers, and multi-phase bridge rectifiers.

Full Wave Bridge Rectifier

A full wave bridge rectifier is a circuit composed of four diodes which converts alternating current input into direct current output. This type of rectifier has four active components and therefore offers several advantages, including higher power efficiency, increased voltage gain, and better current waveforms at the output when compared with a half-wave rectifier.

Half Wave Bridge Rectifier

A half-wave bridge rectifier only consists of two diodes and can effectively double the voltage of the AC input, but will only provide one half of the waveform at the output. Therefore, this type of rectifier is generally not used when a high level of efficiency is required or when a full-wave output is desired.

Multi-Phase Bridge Rectifiers

Multi-phase bridge rectifiers are a type of circuit used to convert multi-phase AC input into DC output efficiently. They consist of sets of diodes wired together in a bridge-like structure that is connected to the multiple phases of the AC input. This type of bridge rectifier is commonly used in applications such as power converters, switched-mode power supply (SMPS) systems, and other power-demanding applications.

RMS to RCG Application Field and Working Principle

The RMS to RCG (Root Mean Square to Root Controllable Gain) bridge rectifier is a special type bridge rectifier circuit that is designed to convert AC input into DC output more efficiently than other types of bridge rectifiers. The RMS to RCG bridge rectifier is composed of four diodes and two reactive components, and can provide higher output power, faster response time and improved stability when compared to other bridge rectifiers. The working principle of the RMS to RCG bridge rectifier can be broken down into three main stages: input stage, rectification stage, and gain control stage.

Input Stage

The input stage of the RMS to RCG bridge rectifier is comprised of two reactive components- a capacitor and an inductor. The capacitor acts as a filter and is used to reduce the amount of alternating current noise present in the input signal, while the inductor acts as an impedance matching element, providing impedance matching between the circuit and the AC input source.

Rectification Stage

The rectification stage is where the AC input signal is converted into DC output. This is achieved through the use of 4 diodes in a bridge structure, which allows current to flow in a single direction only.

Gain Control Stage

The gain control stage is how the output voltage is adjusted to suit the desired application. This is achieved by a voltage-controlled voltage source (VCVS) acting as a “variable resistor” between the load resistance and the DC output of the bridge rectifier. By varying the resistance of the VCVS, the output voltage of the bridge rectifier can be adjusted to suit the desired application.

Conclusion

Bridge rectifiers are widely used in a variety of applications to convert AC current into DC current. The RMS to RCG bridge rectifier is specifically designed to offer increased efficiency and better performance while converting AC current into DC current than other bridge rectifiers. This bridge rectifier is composed of four diodes, two reactive components, and a voltage-controlled voltage source, and is capable of providing higher output power, faster response time, and improved stability. Additionally, the gain control stage allows the output voltage to be adjusted to match the desired application.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description