RMB2SHRCG Discrete Semiconductor Products

RMB2SHRCG is a type of diode bridge rectifier which is used in many modern industrial applications. The RMB2SHRDC rectifier serves as a full wave rectifier for current control applications. One application for the RMB2SHRDC is in motor speed control. The device can be used to provide bi-directional voltage and current control to induce the motor to rotate in either direction. RMB2SHRCG rectifiers have four large terminals in a symmetrical arrangement that represent the main components: an anode, cathode, and two additional. The anode and cathode are connected to the supply and load, respectively, while the other two are connected to the motor. The anode is connected to the positive terminal of the supply and the cathode is linked to the negative terminal. The other two additional terminals are connected to the leads of the motor, which will generate the power to rotate it. The main objective of the RMB2SHRCG rectifier is to convert alternating current (AC) to direct current (DC). This action is achieved by allowing electricity to enter the bridge from the anode side and then travel through the four diodes and exit via the cathode, thus providing a controlled direct current for the motor. When conducting electricity, the diodes on the RMB2SHRCG bridge function just like a valve that controls the amount of current entering and leaving the bridge. When the current enters the bridge from the anode side, it passes through two diodes. These two diodes control the amount of current entering the bridge, meaning that half the total current entering the circuit does not pass on to the motor. The remaining current then travels through the other two diodes, which control the amount of current leaving the bridge. The diodes also prevent any current from returning back in the opposite direction. This ensures that the current stays in the bridge, thus providing a continuous and consistent amount of power to the motor. RMB2SHRCG rectifiers are commonly used in many applications such as power conditioning, motor speed control, and voltage regulation. This type of rectifier is specially designed to be able to transfer high-power and low-voltage current. It is important to note that these rectifiers can only work with AC voltages and not DC current, as DC current will result in the destruction of the rectifier. In summary, RMB2SHRCG is a type of diode bridge rectifier which is used in many modern industrial applications. The RMB2SHRDC rectifier functions as a full wave rectifier for current control applications. It provides bi-directional voltage and current control to induce a motor to rotate in either direction and is commonly used in power conditioning, motor speed control, and voltage regulation applications.

RMB2SHRCG	Taiwan Semic...	0.11 $	3000	BRIDGE RECTIFIER, , 0.8A,...
RMB2S-E3/45	Vishay Semic...	0.6 $	5000	DIODE FAST .5A 200V TO-26...
RMB2S-E3/80	Vishay Semic...	0.27 $	1000	DIODE 0.5A 200V 150NS MBS...
RMB2S RCG	Taiwan Semic...	0.11 $	1000	BRIDGE RECT 1P 200V 800MA...