RN1810-I/RM110

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Transceiver Modules are a type of communication hardware used for exchanging digital data between two or more stations over a local or wide area network. They are typically used for long-range, low-power wireless communication in a wide variety of applications such as remote vehicle monitoring, remote control systems, wireless sensors, mesh networking and machine-to-machine communication. The RN1810-I/RM110 module is an example of a RF Transceiver module designed for short range and low-power applications.

Main Features of the RN1810-I/RM110

The RN1810-I/RM110 is a wireless transceiver module designed to meet the requirements of short-range applications such as industrial automation, home automation and wireless sensor networks. It is a low-cost and low-power module capable of operating at 300 to 500m and is suitable for transmitting digital data over short distances. Some of its main features include:

• Ultrasonic long-range communication: up to 500 meters using 433MHz frequency.
• Data rate up to 38.4 Kbps over a narrowband carrier.
• Low power consumption – the module consumes only 10mA at 3.3V operating voltage.
• Wide temperature range from -40°C to +85°C.
• Small form factor – measuring just 22.7mm x 31.7mm x 4.7mm.

Application Fields of the RN1810-I/RM110

The RN1810-I/RM110 is suitable for a wide range of applications such as long-range industrial automation, home automation, wireless sensor networks, building automation and asset tracking. It can be used in long-range applications such as remote vehicle monitoring, remote control systems, mesh networking and machine-to-machine communication. It can also be used for short-range applications requiring low data rate transmissions such as alarm systems, smart lighting and security systems.

The Working Principle of the RN1810-I/RM110 Module

The RN1810-I/RM110 module operates on the 433MHz frequency and uses Frequency-Shift Keying (FSK) modulation for data communication. The module consists of two integrated subsystems which are the transmitter and receiver. The transmitter subsystem consists of a signal generator and an RF power amplifier, while the receiver subsystem consists of an RF receiver and baseband logic.

The signal generator generates the signal which is then modulated by the FSK modulator with user-defined data. The modulated signal is amplified by the RF power amplifier and then transmitted from the antenna through the 433MHz frequency. The transmitted signal is received by the RF receiver and demodulated by the FSK demodulator to recover the user-defined data. The demodulated data is then passed on to the baseband logic which processes the data and sends the information to the application.

Conclusion

The RN1810-I/RM110 module is an example of a RF Transceiver module designed for short range and low-power applications. It is capable of ultrasonic long-range communication up to 500m and is suitable for transmitting digital data over short distances. It is suitable for a wide variety of application fields such as long-range industrial automation, home automation, wireless sensor networks, building automation and asset tracking. The RN1810-I/RM110 module operates by transmitting and receiving signals via the 433MHz frequency and using Frequency-Shift Keying (FSK) modulation for data communication.

The specific data is subject to PDF, and the above content is for reference