RN50E4421BB14

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through-hole resistors, or “axial” resistors, are simple passive components used for electrical and electronic applications. They are typically cylindrically shaped resistors with terminals that protrude from both ends, allowing them to be inserted into a circuit by passing the terminals through a hole in a board. This article will discuss the application field and working principle of RN50E4421BB14, a through hole resistor.

RN50E4421BB14 is a resistor that has a maximum power rating of 0.4 Watts. It has a resistance value of 4.7K ohms, a tolerance of 5%, a Thermal Resistance between the chip and the ambient temperature of 25 degrees Celsius, and an operating temperature of -55 to +155 degrees Celsius. RN50E4421BB14 is used in a variety of applications, as its small size makes it an ideal solution for industrial and automobile applications that require precision and reliable performance.

RN50E4421BB14 can be used for voltage and current division, noise suppression, and voltage dropping applications. In voltage divider applications, it is used to divide the input voltage into two equal halves, thus providing two different output voltages. In noise suppression application, it is used to reduce or eliminate unwanted noise in the signal, while in voltage dropping applications, it is used to reduce the input voltage to a lower level. Thus, RN50E4421BB14 is a versatile resistor that can be used for a variety of applications.

RN50E4421BB14 works on the principle of Ohm’s law, which states that the current passing through a conductor is proportional to the voltage applied across it. This resistor works by converting electrical power into heat which is then dissipated into the surrounding environment. The amount of power dissipated depends on the resistance value, voltage and current flowing through it. The current passing through the resistor can be calculated by using Ohm’s law. The higher the current, the more power will be dissipated.

RN50E4421BB14 is a simple but reliable device that has been used in a wide variety of applications for over a decade. It has a large resistance range, tolerance range and operating temperature range, making it an ideal solution for various applications. It is also capable of handling higher voltage and current values compared to other resistors, allowing it to be used for power supplies, motors and other high-power applications.

In summary, RN50E4421BB14 is a through-hole resistor with a wide range of applications. It works on the principle of Ohm’s law and is capable of handling higher voltage and current values than other resistors. It is a reliable, small-sized device that is used in a variety of applications, from voltage and current division to noise suppression and voltage dropping.

The specific data is subject to PDF, and the above content is for reference