RNC50H5112BPB14

Series:	Military, MIL-PRF-55182/07, RNC50
Packaging:	Bulk
Part Status:	Active
Resistance:	51.1 kOhms
Tolerance:	±0.1%
Power (Watts):	0.1W, 1/10W
Composition:	Metal Film
Features:	Military, Moisture Resistant, Weldable
Temperature Coefficient:	±50ppm/°C
Operating Temperature:	-65°C ~ 175°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.070" Dia x 0.150" L (1.78mm x 3.81mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	P (0.1%)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

Through hole resistors, used in electronic circuits and components, are a type of electrical resistance that can provide accurate and repeatable results with minimal manual labour. The RNC50H5112BPB14 is one such resistor, and is used in a variety of applications for its reliable accuracy and repeatable performance.

RNC50H5112BPB14 Overview

The RNC50H5112BPB14 is a non-inductive, general-purpose through-hole resistor produced by Yageo. It’s a two-terminal device with a standard 12-pin dual in-line package (DIP) made of molded plastic. The resistor is specified for a maximum voltage rating of 50 V, is CECC approved and compliant with multiple standards and certifications. The resistor also has a maximum power rating of 0.5 W and is rated for operation between -55 °C to 125 °C.

RNC50H5112BPB14 Application Fields

The RNC50H5112BPB14 resistor is primarily used in static and dynamic resistance applications. It’s typically used in power supply circuitry, signal amplification, and temperature sampling. Due to its compact 12-pin DIP package, the resistor can also be used in board-level circuit designs. In addition, its accurate and repeatable properties make it suitable for use in signal generators, power supplies, and other precision instruments.

RNC50H5112BPB14 Working Principle

The RNC50H5112BPB14 resistor works by using the contact between two metal surfaces, such as two leads of a resistor, to create a voltage drop. This voltage drop is called a “resistance” and works by converting electrical energy into heat energy. The amount of heat generated is proportional to the amount of current flowing through the resistor at any given time. As a result, the voltage drop across the resistor is dependent on the amount of current being supplied.

Conclusion

The RNC50H5112BPB14 is a reliable and accurate through-hole resistor that is suitable for a variety of applications. It’s ideal for use in power supply circuitry, signal amplification, and temperature sampling. Its CECC approved nature and various certifications make it a suitable candidate for board-level circuit designs. Furthermore, its reliable accuracy and repeatable performance make it ideal for use in precision instruments such as signal generators or power supplies.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description