RNC55H2002FRB14

Series:	Military, MIL-PRF-55182/01, RNC55
Packaging:	Bulk
Part Status:	Active
Resistance:	20 kOhms
Tolerance:	±1%
Power (Watts):	0.125W, 1/8W
Composition:	Metal Film
Features:	Military, Moisture Resistant, Weldable
Temperature Coefficient:	±50ppm/°C
Operating Temperature:	-65°C ~ 175°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.094" Dia x 0.250" L (2.39mm x 6.35mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	R (0.01%)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

A resistor is an electrical component that is used to resist or limit the flow of electric current. Through Hole Resistors can be found in consumer electronics, automotive, industrial and distinct other applications. They are primarily used to calculate and manage the voltage in a certain circuit. The RNC55H2002FRB14 is a Through Hole Resistor that is widely used in consumer electronics, industrial electronics and other applications. It is a SMD carbon film resistor, with a resistance value of 2K Ohms. It is a low-cost, low-profile resistor, making it suitable for a variety of applications.

Application Field and Working Principle

The RNC55H2002FRB14 is used in consumer electronics, industrial electronics and other applications. It is primarily used to regulate the flow of current in the circuit and also to limit the amount of current in the circuit. It is also used to measure the voltage in a particular circuit.The RNC55H2002FRB14 works on the basis of Ohm’s law, which states that the current passing through a resistor is directly proportional to the voltage (V) applied across it. This means that if the voltage applied across a resistor is increased, the current in the circuit passes through it. The resistance of the RNC55H2002FRB14 determines the amount of current passing through it. If the resistance is increased, the amount of current circulating in the circuit reduces.

Construction and Manufacturing Process

The RNC55H2002FRB14 is a Through Hole Resistor and is made from a combination of carbon granules and metal plates. The main components of the resistor are the carbon granules, resistive film and metal leads which act as an electrical connection between the resistor and the external circuit.Then manufacturing process for the RNC55H2002FRB14 follows a certain sequence. Firstly, the metal plates are stamped in a specific shape. Secondly, a resistive film is applied to the plates. Thirdly, the carbon granules are added and bonded to the resistive film. Finally, a protective casing is added to the resistor to protect it against physical damage.

Advantages

The RNC55H2002FRB14 offers a number of advantages. Firstly, the resistor is low cost and low profile, which makes it ideal for a wide range of applications. Secondly, it offers good power handling capabilities and can cope with high temperature levels. Thirdly, the resistor is highly reliable and has a long life span. Finally, it is also environment-friendly as it does not emit any type of hazardous gases or particles.

Disadvantages

The RNC55H2002FRB14 is not without its disadvantages. Firstly, the resistor is relatively large and bulky, which can make it difficult to install in certain electronic devices. Secondly, the temperature coefficient of the resistor can cause it to drift and change its resistance with time. Finally, as the resistor is made from carbon granules, it can be affected by vibration and shock.

Conclusion

The RNC55H2002FRB14 is a Through Hole Resistor that can be used in a wide range of applications. It offers good power handling capabilities and has a long life span. However, the resistor is relatively large and can be affected by vibration and shock. Despite this, the RNC55H2002FRB14 is still a reliable and cost-effective resistor.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description