ROV05-680K-S-2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

ROV05-680K-S-2, a type of TVS(Transient Voltage Suppressor) - Varistors, MOVs(Metal-Oxide Varistors), is used for protecting electronic circuits and components from the stress due to electrical transients, such as lightning strikes or electron drift. It is designed to absorb high-energy transients and divert these surges to ground. The maximum surge current has been tested and shown to be 130A(8/20μs).

ROV05-680K-S-2 is a resistor-based TVS component. It works by effectively short-circuiting any transient flowing through it, thus diverting the transient from the device it is intended to protect. Since these varistors are designed to be bi-directional, they can be used in both positive and negative polarity applications. The varistor is made up of two components: a resistor and a metal oxide semiconductor, such as zinc oxide. The metal oxide is a ceramic material that is able to absorb high-energy transients and divert them to ground.

ROV05-680K-S-2 has the following main features:

• High surge capability with a 130A maximum surge current.
• Low capacitance and low impedance.
• High frequency response.
• Electrically passive with no active components.
• Small size makes them easy to install in tight spaces.

ROV05-680K-S-2 is ideally suited for applications that require protection from high-energy transients such as:

• Power supplies and converters.
• Printed circuit boards.
• Industrial automation equipment.
• Medical equipment.
• Industrial control systems.
• Ventilation and lighting systems.

ROV05-680K-S-2 is relatively easy to install and connect. It requires no soldering or special tools. Before connecting the varistor, the device must be tested to ensure its proper functioning. To do this, the two test leads must be connected to the varistor with a multimeter. The resistance of the varistor should be recorded and compared to the reading given on the datasheet. If the resistance is outside of the acceptable range, the varistor should be replaced.

In summary, ROV05-680K-S-2 is an ideal choice for applications requiring protection from high-energy transients. It is easy to install, requires no special tools, and offers superior performance over other types of TVS components. Its small size makes it ideal for tight spaces, and its high surge capability offers a greater level of protection than other types of MOVs. Therefore, ROV05-680K-S-2 is an excellent choice for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference