RP310110

Turn On Voltage (Max):	77 VDC
Coil Resistance:	23.1 kOhms
Coil Power:	500 mW
Contact Material:	Silver Cadmium Oxide (AgCdO)
Operating Temperature:	-40°C ~ 70°C
Termination Style:	PC Pin
Mounting Type:	Through Hole
Features:	Sealed - Flux Protection
Release Time:	2ms
Operate Time:	8ms
Turn Off Voltage (Min):	11 VDC
Series:	RP II/1, SCHRACK
Switching Voltage:	400VAC - Max
Contact Rating (Current):	16A
Contact Form:	SPDT (1 Form C)
Coil Voltage:	110VDC
Coil Current:	4.8mA
Coil Type:	Non Latching
Relay Type:	General Purpose
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The RP310110 is a power relay with a current rating of over 2 amps. It is designed for built-in use in electrical and electronic applications, and has a wide variety of uses in industrial, commercial, automotive and consumer electronics. The RP310110 is a single pole double throw (SPDT) relay. This means that it has two common terminals and two contacts. When the relay is activated, the two contacts are connected to the two common terminals, allowing power to flow between them. The activation of the relay can be done by a number of methods, including a voltage input on the coil, a mechanical switch, or a magnetic field. The RP310110 is designed to be robust and able to handle heavy-duty applications. It is rated to be able to handle DC currents up to 10A and AC currents up to 6A. It also features multi-block contact terminals, which make it easy to install in a variety of electrical systems. The relay is sealed in an epoxy filled case to make it highly resistant to dust, dirt and other environmental contaminants. The RP310110 also has an integrated diode that protects the contacts of the relay from transient voltage pulses. It also features snap-action switching contacts that make it suitable for applications that require rapid switching, such as in cars and appliances. As the RP310110 is designed for heavy duty use, it is important to adequately consider its working environment before use. The ambient temperature should be within the specified limits stated in the datasheet. The voltage across the relay should not exceed the specified rating, and the current rating should be sufficient for the expected load. In addition, it is always best practice to use adequate heatsinking for the RP310110 to ensure that its working temperature is not exceeded. In conclusion, the RP310110 is a robust power relay with a rated current rating of over 2 amps and a variety of uses in industrial, commercial, automotive and consumer electronics. It features snap-action switching contacts, a diode for protection against transients and multi-block contact terminals for easy installation. The RP310110 must be used with the correct voltage and current rating for the application, and adequate protection for the environment in which it is used should be provided.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description