RPM5538-H12E4A

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optical sensors are sensors used to detect changes in light intensity in order to sense the presence of an object or detect a change in an object’s environment. Photo detectors, which are a type of optical sensor, use a photosensitive element to convert incoming light into an electrical signal. The remote receiver is one type of photo detector that converts an infrared signal from a remote control into an electrical signal. The RPM5538-H12E4A is a remote receiver designed to detect an infrared signal from a remote control.

The RPM5538-H12E4A was designed to detect infrared signals in the 860–950nm range, the same range used by most consumer remote controls. It has a wide field of view, meaning it can detect signals from anywhere in its 180-degree area of detection. It is also designed for low-power usage, only consuming 1.3mA of current when operating, allowing it to be used in battery-powered systems. It has a typical response time of 10ms, meaning it can react quickly when detecting a signal.

The RPM5538-H12E4A can be used for a variety of applications, including remote control detection, presence detection, and range measurement. It can be used as a low-cost alternative to more sophisticated infrared detectors that are used in more intricate applications. Due to its low-power design, it is well suited for battery-powered systems, making it ideal for use in any system that requires remote control operation.

The working principle of the RPM5538-H12E4A is fairly straightforward. When the infrared signal is detected, the detector’s photodiode converts the signal into an electrical current. This current is then amplified and sent to an output pin, which can be used to control other components in the system. The amplifier has a sensitivity of 0.75V/1000lux, meaning that it will output a voltage proportional to the light intensity it detects. The detector also has a high signal-to-noise ratio, allowing it to reject interference from other light sources, such as fluorescent lighting.

The RPM5538-H12E4A is an excellent choice for projects that require the detection of infrared signals from remote controls. Its low power consumption makes it ideal for battery-powered systems, while its fast response time makes it suitable for many applications. Its wide field of view and high signal-to-noise ratio ensure that it will reliably detect the desired infrared signals. Overall, it is an excellent choice for any system that requires the use of a remote control.

The specific data is subject to PDF, and the above content is for reference