Series:	RPM5500
Packaging:	Tape & Reel (TR)
Part Status:	Obsolete
Sensing Distance:	12m
B.P.F. Center Frequency:	37.9kHz
Voltage - Supply:	4.5V ~ 5.5V
Current - Supply:	1.5mA
Orientation:	Side View
Mounting Type:	Surface Mount
Operating Temperature:	-10°C ~ 75°C (TA)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optical Sensors - Photo Detectors - Remote Receiver: RPM5538-H14E2A Application Field and Working Principle

Introduction

The RPM5538-H14E2A is an optical sensor that belongs to the photo detector family, and falls under the category of remote receivers. It is widely used in a myriad of applications, including optical measurement systems, general precision measurements, and data communication systems. This article seeks to provide an in-depth explanation of the applications and working principles of RPM5538-H14E2A.

Application

The primary application of the RPM5538-H14E2A is within remote data collection systems. Its ability to measure optical signals at long-distance and convert them into electrical signals makes it perfectly suitable for this purpose. When used as a remote data collection system, the RPM5538-H14E2A is usually paired with a suitable laser measuring device, such as a spectrometer. This allows for the remote transmission of data that has been gathered by the spectrometer. Such data can be used for a variety of purposes, including environmental monitoring, traffic control, and research studies.The RPM5538-H14E2A can also be used in digital systems for the conversion and transmission of optical signals. It is commonly used in optical data communication systems, such as local area networks, metropolitan area networks, and wide area networks. It is also used in medical imaging systems for the transmission of medical images from one location to another.

Working Principle

The RPM5538-H14E2A is an integrated optical detector that operates on the principle of detecting optical signals and converting them into electrical signals. It is made up of a series of components, including a photodetector chip, a series of amplifying and power management circuits, and a conversion circuit. The photodetector chip is the most important component of the RPM5538-H14E2A, as it is responsible for the actual detection of the optical signal. The photodetector chip consists of a series of photodetector elements that convert the incoming optical signal into electrical signals. The electrical signal is then amplified by the amplifier circuit and passed through the power management circuit for signal conditioning. Finally, the amplified electrical signal is passed through the conversion circuit, which converts it into the desired digital format.

Conclusion

The RPM5538-H14E2A is an important optical sensor that is widely used in a variety of applications, primarily related to data collection and transmission. Its working principle is based on the detection of optical signals and the subsequent conversion of these signals into electrical ones. The documentation provided in this article should be sufficient for the reader to gain an appreciation of what the RPM5538-H14E2A is and what it can do.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description