RS2BA-13-F Discrete Semiconductor Products

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are widely used in all sorts of applications, from light control to voltage regulation. The RS2BA-13-F is one such diode, used in a variety of applications. It is a single rectifier diode, and in this article we will discuss its application field and working principle.

The RS2BA-13-F diode is commonly used for power factor correction in power supplies, for rectifying ac voltage, for protecting circuits from transient overvoltages, and for reverse polarity protection. Its reverse breakdown voltage is 13V at a reverse current of 1mA. Its power dissipation is 400mW, with a junction temperature of 150°C.

The working principle of this diode is simple. When voltage is applied to it, the C-N junction in the diode is able to block one-way current flow. This allows it to act as a kind of switch, blocking current in one direction and allowing it to flow in the other.

When the diode is forward-biased, its junction voltage is higher than the applied voltage. This creates an electric field between the N-type region and the C-type region of the diode, which resists the flow of holes from the N-type region to the C-type region. When the voltage is reversed, the electric field between the two regions is reversed, allowing the current to flow freely through the diode.

In order to use a diode properly it is important to understand its junction voltage and its forward voltage drop. The junction voltage varies with temperature, and should not exceed the rating of the diode. The forward voltage drop is the difference between the applied voltage and the junction voltage, and should be taken into account when calculating the current in the circuit.

The RS2BA-13-F can be used in many applications, from rectifying ac voltages to protecting circuits from reverse-bias transients. It is an excellent choice for power factor correction in power supplies, and for protecting circuits from transient overvoltages.

In conclusion, the RS2BA-13-F is a single rectifier diode that is used in a wide variety of applications. Its reverse breakdown voltage is 13V, and it can be used for power factor correction in power supplies, for rectifying ac voltage, for protecting circuits from transient overvoltages, and for reverse polarity protection. The working principle of this diode is based on the C-N junction in the diode which is able to block one-way current flow, allowing the diode to act as a switch. It is important to understand the junction voltage and forward voltage drop of the diode in order to use it properly.

The specific data is subject to PDF, and the above content is for reference