RSB6.8CSFHT2RA Circuit Protection

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TVS (Transient Voltage Suppressors) diodes are often used to protect electronic circuits and components from transient voltage spikes. Typically, these surges occur due to lightning strikes or industrial machinery generated electrical interference. The RSB6.8CSFHT2RA is one type of TVS diode that is used to provide protection against overvoltage. In this article, we will explore the application field and working principle of the RSB6.8CSFHT2RA.

The RSB6.8CSFHT2RA is a unidirectional configuration TVS diode, with a standoff voltage of 6.8V and a peak power dissipation of 15W and peak pulse current of 17A. This diode can handle peak surge currents up to 17A and ensures that, in the event of such a surge, voltage will not exceed 6.8V. This device is well suited for applications in which overvoltage protection is needed, such as automotive electrical systems, telecommunication systems, industrial machinery, and power supplies.

The RSB6.8CSFHT2RA television suppression diode works by clamping high-voltage spikes to a safe operating level before they can damage the connected components. It acts as a conductive bridge between the power source and the load. When the diode is in a lower forward bias voltage, it presents an open circuit and no current will flow between the power source and the load. However, when the applied voltage exceeds its clamping voltage, the diode begins to conduct, allowing current to flow. This ensures that the voltage level will not rise above a certain limit and that any spike will be clamped to prevent damage.

In order to ensure proper operation, it is important to take into consideration a few factors when installing the RSB6.8CSFHT2RA. Firstly, the power source should be of a sufficient voltage to match the device’s clamping voltage. Secondly, the device should be installed on a printed circuit board so that the thermal properties of the board can be taken into account. This helps prevent any thermal runaway which could harm the device or the connected components. Finally, the TVS diode should be used in conjunction with a transient voltage suppression (TVS) heatsink to ensure proper heat dissipation.

In conclusion, the RSB6.8CSFHT2RA is a useful TVS diode for providing overvoltage protection in a variety of applications. This device is well-suited for use in automotive, telecommunication, industrial machinery, and power supply applications. When installing this device, it is important to take into consideration the device’s power ratings, as well as the thermal characteristics of the circuit board on which it is installed. Proper heat dissipation should also be taken into account, with the use of a proper TVS heatsink. Following these steps will ensure that the TVS diode will work to protect the circuit from high voltage transients.

The specific data is subject to PDF, and the above content is for reference