RURG80100-F085

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are one of the most important components in electronic circuits. They are used to control and regulate the direction of current flow in an electronic circuit. A single rectifier diode, such as the RURG80100-F085, is a semiconductor device which allows the flow of current in one direction while blocking the flow in the opposite direction. This makes the single rectifier diode suitable for many applications, and it can be used in devices ranging from amplifiers to switch-mode power supplies and solar cells.

The RURG80100-F085 is a low-frequency (200 VDC blocking voltage) rectifier diode. It has a typical forward voltage drop of 1.5 V at a forward current of 2 A and a typical reverse recovery time of 25 ns. This diode is ideal for applications such as high efficiency switching power supplies, AC/DC converters, motor drives, and solar cells. The RURG80100-F085 has a maximum junction temperature of 150 °C and a typical thermal resistance of 4.5 °C/W.

The working principle of a single rectifier diode can be explained using a simple circuit diagram. The circuit includes a source of direct current which provides the voltage needed to operate the diode, as well as a load. When a forward voltage is applied to the diode, the diode “turns on” and allows current to flow from the source to the load. The current passes through the diode as electrons move from the P-type region to the N-type region. When a reverse voltage is applied, the diode blocks the current and no current is passed from the source to the load. This is because the electrons can no longer move from the P-type region to the N-type region when a reverse voltage is applied.

The RURG80100-F085 single rectifier diode has a wide range of applications where a low-frequency rectifier is required. It can be used as a switch, to control the direction of current flow and protect a circuit from voltage reversals. It can also be used in power supplies, to prevent the voltage from exceeding a certain limit. This diode can also be used in a pulse-width modulation system, to increase the efficiency and reduce the power consumption of a circuit. Finally, this diode can be used in various types of solar cells, such as dye-sensitized, silicon and gallium arsenide solar cells.

In summary, the RURG80100-F085 is a single rectifier diode with a low forward voltage drop and a fast recovery time. It has a wide range of applications in both power supply and solar cell circuits. The diode allows current to flow in one direction and blocks current in the other direction, following the principle of conventional diode operation.

The specific data is subject to PDF, and the above content is for reference