RV8H-2L-D6

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RV8H-2L-D6 power relays are designed primarily for industrial applications where reliable control is required of AC and DC circuits typically rated up to 2 amps. These relays feature a single-pole double-throw (SPDT) contact configuration with a 5-pin base. The RV8H-2L-D6 is designed to switch DC power, thus providing a reliable connection for when AC power wasn’t originally planned for use. In some cases, this relay can be used for light-duty switching of AC power as well.

The RV8H-2L-D6 relay has a current rating of 2 amps at 250 volts AC, or 3 amps at 110 volts AC. This relay is most often used to provide a reliable control connection via a remotely located switch or a simple relay circuit. The base of the RV8H-2L-D6 is equipped with a 1/4” inch quick-connect terminal compatible with standard spade terminals for fast and easy wiring.

The base contains five terminals. Two main terminals are used to power the control circuit, while two additional terminals (normally open and normally closed) are used to control the operation of the load. The fifth terminal is designated as the common terminal, and it is connected to the load.

The relay’s internal contact springs are designed to spring to one of the two operate positions, either open or closed. For the RV8H-2L-D6 relay, the normally open position opens the circuit between the common and normally open terminals while the normally closed position closes the circuit and enables the circuit between the common and normally closed terminals. The relay also contains two opposing coils which control the open and closed positions. When the supply voltage is applied, the coils energize, allowing the internal contact springs to move to the operated position.

The control of the RV8H-2L-D6 is accomplished by means of a normally open or normally closed switch connected to the power source. When the switch is closed, the relay is energized, and the contact position is changed according to the control circuit. When the switch is open, the internal coils are de-energized, and the contact springs will return to their resting positions.

The RV8H-2L-D6 is ideal for applications such as doorbells, alarms, environmental control systems, thermostats, low-voltage AC or DC circuit control, etc. This type of relay is also commonly used in medical equipment, instrumentation, and monitoring, HVAC systems, industrial control systems, and a variety of general consumer and commercial equipment.

In summary, the RV8H-2L-D6 is a power relay designed to switch circuits rated up to 2 amps at 250 volts AC or 3 amps at 110 volts AC. The relay is activated by pulling a closed switch, energizing two internally-mounted coils which cause the contact springs to move the relay to the operated position. Common applications such as doorbells, alarms, environmental control systems, thermostats, and others all benefit from the reliable control and time-saving wiring provided by the RV8H-2L-D6.

The specific data is subject to PDF, and the above content is for reference