S1C17M13F101100

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

S1C17M13F101100 application field and working principle

The S1C17M13F101100 is an 8-bit microcontroller by Renesas Electronics Corporation (formerly known as NEC Electronics Corporation), and it is part of the S1C17M13 series, a single-chip microcontroller (MCU) for embedded devices. This series of MCUs offers low power consumption, and low pin counts, making them ideal for devices that require small size and hardware development costs that are low.

Application Fields

The S1C17M13F101100 is mainly used in industrial automation, medical equipment, security and surveillance, and the automotive industry. In the industrial automation area, it is used to monitor and control equipment, as well as to provide an interface between various parts of an industrial system. In medical equipment, the MCU is used for medical equipment controls, patient monitoring, and data acquisition. For security and surveillance, it is used in motion detectors, alarm systems, entry control, and facial recognition systems. In the automotive industry, the MCU is used in automotive body and safety systems, dashboard systems, powertrain control, and navigation systems.

Working Principle

The S1C17M13F101100 consists of an 8-bit CPU core, a set of on-board peripherals, and a large set of GPIOs. The CPU core is based on the Renesas R8C/Tiny architecture and it operates with a maximum clock speed of 8 MHz. The on-board peripherals include analog-to-digital converters (ADC) and digital-to-analog converters (DAC), timers, SERCOMs (serial communication engines), I2C, I2S, and SPI interfaces, a POR (power-on reset) circuit, and an EEPROM (electrically erasable programmable read-only memory). The GPIOs are used for the I/O ports, power supply and reset circuits.

When the MCU is powered up, the POR circuit starts the power-up sequence. The firmware is then loaded from the EEPROM and the CPU starts executing the instructions. At the same time, all the on-board peripherals start up and are ready to be used. The I/O ports can then be used to interface with other devices and the ADC and DAC can be used to process analog signals. The timers can be used to generate interrupts and the SERCOMs can be used for communication with other devices.

When the program is finished, the CPU will enter the idle state and wait for interrupts. The MCU can then enter a low power sleep mode to reduce power consumption or it can enter an ultra low power sleep mode to further reduce power consumption. The MCU can be woken up from sleep mode by an interrupt from one of its peripherals or from an external source. Once the MCU is awakened, the process is repeated.

Conclusion

The S1C17M13F101100 is an 8-bit MCU from NEC Electronics Corporation and it is part of the S1C17M13 series. It is small, low power and has a low pin count which makes it ideal for embedded applications. It is mainly used in industrial automation, medical equipment, security and surveillance, and automotive systems. The CPU is based on the R8C/Tiny architecture and it operates with a maximum clock speed of 8 MHz. The MCU also has on-board peripherals such as timers, SERCOMs, I2C, I2S, and SPI interfaces, as well as GPIOs for I/O ports. The MCU can also enter a low power or ultra low power sleep mode to reduce power consumption.

The specific data is subject to PDF, and the above content is for reference