S1JFSHMXG

Series:	Automotive, AEC-Q101
Packaging:	Tape & Reel (TR)
Part Status:	Active
Diode Type:	Standard
Voltage - DC Reverse (Vr) (Max):	600V
Current - Average Rectified (Io):	1A
Voltage - Forward (Vf) (Max) @ If:	1.1V @ 1A
Speed:	Standard Recovery >500ns, > 200mA (Io)
Current - Reverse Leakage @ Vr:	1µA @ 600V
Capacitance @ Vr, F:	9pF @ 4V, 1MHz
Mounting Type:	Surface Mount
Package / Case:	SOD-128
Supplier Device Package:	SOD-128
Operating Temperature - Junction:	-55°C ~ 150°C

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to the S1JFSHMXG

The S1JFSHMXG (Single in-Line Junction Field-effect Shunt Mains Gate) is a diode-based rectifier that is used in power management and distribution in a variety of different applications. It is commonly referred to as an SLP, because it is a single leg power switch. The S1JFSHMXG uses a single switching element to isolate a power source from a load and can also be used to regulate and control the flow of current. This makes the device useful in applications such as UPS systems, EMI filters, and the control and isolation of higher currents.

Applications of the S1JFSHMXG

The S1JFSHMXG is a versatile device that can be used across many different applications. In commercial and industrial settings, the device can be used for the control and isolation of mains power lines. It can also be used for the reliable switching of alternating and direct current, making it ideal for UPS systems and EMI filters. It is also used in a variety of automotive applications, such as power steering, motor controllers, vehicle charging systems, and more.

Working Principle

The S1JFSHMXG works by using two semiconductor junctions to act as a shunt. The two junctions are connected in series and are used to control and regulate the flow of current through the circuit. When a voltage is applied to the device, one of the junctions will become the anode and the other will become the cathode. The anode will then draw current from the source and transfer it to the cathode. This allows for the possibility of current control, since the resistance at the anode will dictate the flow of current. Additionally, the S1JFSHMXG can serve as an isolation switch, as it can be used to completely disconnect the source from the load.

Advantages of the S1JFSHMXG

The S1JFSHMXG offers a number of advantages over other rectifier designs, making it an ideal choice for a variety of different applications. The device has a low on resistance, meaning it is able to switch higher currents with greater efficiency. In addition, the device is small and light, making it easy to install and integrate into existing systems. Finally, the device is extremely reliable, with a long service life and low manufacturing cost.

Conclusion

The S1JFSHMXG is a single-leg power switch and rectifier that is used in a variety of different applications. It uses two junctions connected in series to provide control and regulation of current, making it ideal for UPS systems, EMI filters, and the control and isolation of higher currents. The device has a low on-resistance, making it able to switch high currents with efficiency, and is also small, light, and reliable. This makes the S1JFSHMXG a popular choice for a variety of industrial, commercial, and automotive applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description