S1PB-M3/84A

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

S1PB-M3/84A is a single diode rectifier that belongs to the array of components used for controlling and converting electrical current. The device is rated for a continuous forward current of 7 Amps, with a non-repetitive surge current of 30 Amps. It is designed for applications in systems with an alternating current voltage supply exceeding the required forward voltage drop by at least 2 V. The S1PB-M3/84A has an anode and a cathode, with the anode connected to the positive side of the power source and the cathode connected to the negative side.

The main function of a single diode rectifier is to block current when the applied voltage has a negative polarity, while allowing current to flow when the voltage has a positive polarity. This is known as rectification and is accomplished by the P-N junction of the device. The junction is formed by a semi-conductor material, such as silicon, with two differently doped regions of minority carriers. When the anode is at a greater potential than the cathode, current flows through the diode in a process known as forward-bias conduction. Conversely, when the potential of the anode is less than that of the cathode, the junction does not conduct current and the device serves as an open circuit.

The S1PB-M3/84A device is primarily used to prevent backward-bias conduction, where current flow is reversed, that can occur due to wave reflections due to long cables and antennae. It is also used to provide power conditioning and waveform shaping in power supplies, as well as providing overvoltage protection in lighting systems and other applications. The device may also be used in electromechanical relays and switch circuits, as well as to protect sensitive electronic components from reverse polarities.

The S1PB-M3/84A uses an alloy junction material, which helps improve the conduction properties of the device. The alloy junction also has a higher thermal stability than a silicon junction, allowing for increased heat dissipation and longer life of the device. The device is also designed to be capable of withstanding peak inverse voltages, typically up to 1000 volts, although this depends on the specific device.

The S1PB-M3/84A is a versatile device suitable for a range of applications. Its efficiency, reliability, and long-term stability make it an ideal choice for many power control and conversion systems. It is easy to install and operate, and is a cost-effective solution for many applications. These features make it one of the most popular single diode rectifiers available.

The specific data is subject to PDF, and the above content is for reference