S1PM-E3/85A

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The S1PM-E3/85A is a single diode rectifier that provides a simple solution for a wide variety of applications. It has a maximum reverse voltage of 85 Volts, a maximum forward current of 1 Amp, and a maximum power dissipation of 2 Watts. Additionally, it has a high temperature coefficient and large capacitance.

In terms of its application field, the S1PM-E3/85A is used for the rectification of alternating current. It can be used to build circuits for generating direct current power, such as power supplies and battery chargers. It can also be used as a switch in circuits, such as pulse width modulation circuits. Moreover, it can be used to build diode logic gates, which are essential components in many logic circuits.

The S1PM-E3/85A operates on the basic principle of rectification. This is the process by which alternating current is converted into direct current. It works by allowing the current to flow in one direction when the voltage is above a certain threshold, while preventing the current from flowing in the other direction. When the voltage is below the threshold, the current is blocked. This is known as forward biased. Conversely, when the voltage is above the threshold, the current is allowed to flow in the other direction, and this is known as reverse biased.

In terms of its working principle, the S1PM-E3/85A must be forward biased for it to be used for rectification. This means that the forward voltage of the diode must be above the threshold voltage. If the voltage is too low, the diode will not allow the current to flow and the circuit will not work. To ensure that this does not happen, a resistor is used to limit the current to a safe level. Additionally, a capacitor is used to smooth out the current, eliminating any spikes or impulses.

Once the S1PM-E3/85A is forward biased and the circuit is set up correctly, it can be used to rectify alternating current. The alternating current flows through the circuit and passes through the diode only when the voltage is above the threshold. When the voltage drops below the threshold, the diode blocks the current, allowing only the direct current to pass through. The direct current is then collected and can be used as a power source.

The S1PM-E3/85A is a versatile single diode rectifier that has a wide range of applications. It can be used for rectifying alternating current, building power supplies and batteries chargers, and creating diode logic gates. It operates on the basic principle of forward and reverse biased, and must be correctly set up using resistors and capacitors in order to achieve optimal results.

The specific data is subject to PDF, and the above content is for reference