S2055RTP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors - SCRs are electronic components that act like a switch, allowing current to pass through when the gate current is supplied to them. The S2055RTP is one such Thyristor, an SCR specifically designed for use in high power applications such as motor speed control and power transmission. In this article we will discuss the application fields, as well as its working principle.

The S2055RTP can be used in applications where large power levels are needed and the efficiency of power conversion between AC and DC is important. This makes the S2055RTP the ideal choice for changing the speed of a motor or controlling the flow of current within a power line. The S2055RTP is also well suited for applications which require high voltage isolation as its zero-cross sensing/switching mode prevents any direct contact between components in the circuit.

The S2055RTP also features a very low turn-off voltage, meaning that the amount of current needed to turn it off from an active state is less than other SCRs – this reduces the need for power excessive power in the circuit. Additionally, its low reverse recovery time (RRT) during switching helps to reduce power loss and maintain accuracy.

In terms of its working principle, the S2055RTP utilizes an electrical process known as a \'charge-storage mechanism.\' This mechanism is triggered when a small amount of forward current-flow reaches the gate terminal. This current creates a negative potential across the gate and avalanche junction, creating a condition of electron avalanche that carries a large positive net charge. When the charge exceeds the device\'s avalanche threshold and current flows between the primary anode and the main cathode, the thyristor has been triggered.

The S2055RTP is then held in the ‘on’ state until either the load current decays below the holding current threshold or a reverse voltage signal is applied to the gate terminal. When this occurs, the S2055RTP returns to the \'off\' state, from which the cycle can then be repeated.

In summary, the S2055RTP is a Thyristor - SCR specifically designed for high power applications such as motor speed control and power transmission. This device is well suited for converting large amounts of power between AC and DC, due to its low turn-off voltage, high isolation levels and low reverse recovery time. Its working principle is based on the \'charge-storage mechanism\', which is triggered when a small amount of forward current flows through the gate, creating a negative potential that initiates the electron avalanche.

The specific data is subject to PDF, and the above content is for reference