S212S01

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Solid state relays (SSRs) are used in a wide variety of applications due to their high reliability, long operational life, fast switching speeds, and ability to handle very large currents. The S212S01 is a high-performance three-phase solid state relay typically used in industrial applications, motor control, and energy management systems.

Applications

The S212S01 is a three-phase solid state relay. It is designed for use in three-phase motor control and energy management systems, such as the control of pumps, air conditioning systems, and induction motors. It can be used for load switching, over/under voltage protection, over/under temperature protection, motor overload protection, ground fault protections, and current monitoring. In addition, it can be used to control solar energy and LED lighting sources.

Working Principle

The S212S01 uses a solid state relay (SSR) and thyristor to switch the AC power supply to a load. The SSR is an on/off switch that is activated by an external control signal. It is triggered by a small current and then conducts a larger current that is connected to the load. The thyristor is a semiconductor component that allows current to flow in one direction only, and is used to control the voltage and current to the load. The relay is triggered by a small voltage, usually 5 volts, from a control circuit and then conducts the large current required to the load.

The S212S01 works in three phases. When a control signal is received, it will trigger the SSR and thyristor to switch on the load. The voltage will start to rise until it reaches the set level, and then the thyristor will start to conduct the current. The load will then be connected to the AC power source and the current will start to flow. The control signal also works in reverse, if the set voltage level is exceeded, the thyristor will switch off the load and the current will stop flowing.

Conclusion

The S212S01 solid state relay is a reliable, fast-switching device designed for use in three-phase motor and energy management systems. It operates by switching the AC power supply to a load in response to a small control signal. The S212S01 is well-suited for a variety of applications, such as load switching, over/under voltage protection, over/under temperature protection, motor overload protection, ground fault protections, current monitoring, and control of solar energy and LED lighting sources.

The specific data is subject to PDF, and the above content is for reference