Allicdata Part #: | CC1132-ND |
Manufacturer Part#: |
S312 |
Price: | $ 0.00 |
Product Category: | Relays |
Manufacturer: | Sensata-Crydom |
Short Description: | RELAY SSR 3A PC MNT W/O SNUB |
More Detail: | Solid State Relay SPST-NO (1 Form A) Module |
DataSheet: | S312 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | 3 |
Packaging: | Bulk |
Part Status: | Obsolete |
Mounting Type: | Through Hole |
Circuit: | SPST-NO (1 Form A) |
Output Type: | AC, Zero Cross |
Voltage - Input: | 3.5 ~ 8VDC |
Voltage - Load: | 20V ~ 140V |
Load Current: | 3A |
Termination Style: | PC Pin |
Package / Case: | Module |
Supplier Device Package: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Solid state relays (SSRs) are electronic switches used to control electrical signals. They are an increasingly popular alternative to traditional mechanical relays, due to their increased reliability, low power consumption and small size. S312 is a type of SSR, which are commonly utilized in commercial and industrial applications such as motor control, lighting control, temperature control and many others.
S312 relays consist of a power semiconductor device, such as a TRIAC, SCR or MOSFET, typically mounted on a heat sink and sealed in an epoxy package. The power component is connected to the terminals of an input side, the working part. On the output side, relay contacts that are either normally-open (NO) or normally-closed (NC) are connected in series. The operating voltage of the S312 relays ranges from AC 24 Volt(V) to 240V, and their output contact current rating can reach up to 10 Amps (A).
The electric current required for the S312 relay to operate is much lower than the electric current required for the mechanical relays. The working principle of the S312 relays is simple: when electric current flows to the input side, the power semiconductor device is turned on and will stay on until the current is removed. The output side circuit will be connected, and the devices connected to it will be effectively powered on.
S312 relays can also operate in two lead half-wave or full wave control modes. In half-wave mode, the current flow after the negative half-wave is switched off and the relay will be reset and ready for the next input signal. However, full wave control allows more precise control of the output current and is more efficient than half-wave mode. It is usually used for applications where precision control and low power consumption are required.
S312 relays are widely used in various commercial and industrial applications because of their reliability and simplicity. They are particularly suitable for controlling motors, air conditioners, lights, pumps, fans, heaters, and many other electrical devices. In addition, S312 relays offer a high degree of protection against voltage fluctuations, making them an ideal choice for applications where power spikes or large current fluctuations are anticipated.
A major advantage of using S312 relays is their low power consumption, resulting in a more economical operation and less maintenance costs. The integrated heat sink makes them able to operate continuously without overheating, allowing for the efficient and long-term operation of electrical devices. Lastly, as the relays are solid-state, they are much more reliable than traditional mechanical relays, reducing the chances of failure or malfunction.
In conclusion, S312 relays are widely used in commercial and industrial applications due to their high reliability, low power consumption and precision control. They are simple to operate, and their design makes them suitable for a wide range of applications. The S312 relays offer a great degree of protection against voltage fluctuations and are able to operate continuously without overheating. They provide an efficient and cost effective solution for controlling a variety of electrical devices.
The specific data is subject to PDF, and the above content is for reference
SSR ZERO SW 480V 16ASolid State
RELAY SSR SPST-NO 20V 4USOPSolid State R...
RELAY DUAL 25A 240V ZC 4-15VDCSolid Stat...
CTRLR TEMP SSR 480V 90A AC OUTSolid Stat...
CTRLR TEMP SSR 240V 90A AC OUTSolid Stat...
RELAY SSR 18A 240VAC AC OUT QCSolid Stat...