S4003LS2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors - SCRs: S4003LS2 application field and working principle

Thyristors - SCRs, also known as Silicon Controlled Rectifiers (SCRs), are solid-state switches widely used for various applications, from traditional motor control circuits to modern energy management systems, providing user-friendly and cost-effective solutions for powering on or powering off electrical loads. One of the widely-used SCR models is the S4003LS2, designed by IXYS Electronics Corporation.

The S4003LS2 is a dual-gate, single-phase SCR. The two gates are provided for applications in which a thyristor is needed to drive two separate load circuits in parallel. This model is unique in that it can be triggered both by a standard AC sine wave and by a more sophisticated voltage waveform, such as a six-phase wave, which allows the user to better control the power output of the load circuit.

The parts require no extra hardware to be installed into electrical circuits, making them ideal for a variety of applications. They can be used to control small motors, pumps, lighting systems, heaters and more. The S4003LS2 can be used in DC circuits, AC circuits with light dimmers and AC circuits with special pulse-width-modulated (PWM) voltage waveforms, for greater power-control accuracy.

To use the S4003LS2, the user applies an external triggering source of a predetermined voltage amplitude in the same polarity as the main DC voltage source. When triggered, the S4003LS2 switches on, allowing the current to flow until it\'s switched off again by the user, or until the current drops below the “hold-in value”. In cases where the external triggering source is not available or unavailable, the internal control voltage source of the S4003LS2 is used to switch the device on and off.

The S4003LS2 has a maximum current rating of 10 amps, with a voltage drop of 1.5V at 50 amperes. It has a very low forward turn-on time, allowing it to be triggered with as little as 0.1V. It also has a very low turn-off time, allowing it to be switched off with as few as 0.6V. The maximum peak repetitive reverse voltage and the maximum peak gate voltage are both 20V, making the device suitable for a variety of applications.

The S4003LS2 is widely used in various motor control applications in automotive, industrial, and consumer products. It can be used to switch on or switch off low-voltage DC motors, and it\'s also widely used for higher-power AC motor control applications. The SCR\'s flexibility and low cost makes it a popular choice for motor control applications.

The S4003LS2 can also be used in lighting systems. It can be used to control the brightness of a light source, switch lights on or off, and provide a PWM signal for energy savings and precise dimming of LEDs and incandescent/halogen lamps. It can also be used in power supplies, providing precise control of the power-up and power-down of circuits.

The S4003LS2 is a great option for many applications, offers a variety of features and benefits, and provides the user with excellent control of electrical circuits. It is easy to install and use, provides reliable operation and offers a cost-effective solution for controlling electrical loads.

The specific data is subject to PDF, and the above content is for reference