S4008VTP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors - SCRs are semiconductor devices that are mainly used in electronics circuits as switches. The S4008VTP SCR is a 4 pin, 1000V single-phase forward bidirectional triggering thyristor with a maximum surge current of 8A. This type of thyristor has the ability to control both high and low current loads with the appropriate power rating.

The S4008VTP SCR is ideal for use in many applications including motor speed control, AC/DC lighting, temperature control, and power factor correction. It can also be used to protect circuits from short circuits, over voltage, and over current situations. This thyristor is also used for rectification, controls for inverters and UPS. It has a blocking voltage rating of 1000V, with a maximum current rating of 8A and a power dissipation rate of 225mW.

The working principle of S4008VTP SCR is based on the fact that unlike a triac, it acts as a switch when triggered. That is when sufficient current is provided, it allows current to flow through it and when the current is insufficient, it blocks the current. The S4008VTP SCR has built in circuit protection that prevents damage to the device due to too much current. The current is limited by a control rectifier in the control circuit.

The triggering of S4008VTP SCR is done through an external voltage or current applied to the gate of the thyristor. This voltage or current must be greater than the minimum specified value of 2V and 0.2A respectively. When the thyristor is triggered, the current flows from the anode to the cathode and the voltage across the device increases until it reaches the breakdown voltage. This voltage must be greater than the breakdown voltage of the device in order for the current to flow through it.

The switching of the S4008VTP SCR is also done through the external voltage or current applied to the gate. When the current or voltage is removed, the device stops conducting and the current stops flowing. This makes this type of thyristor useful for controlling current in a circuit as the current can be switched on or off with the application of the appropriate voltage or current.

In conclusion, the S4008VTP SCR is a reliable and robust device that is used in many applications and has a wide range of applications, such as motor speed control, lighting, temperature control, and power factor correction. This device also offers protection against over voltage, over current and short circuit situations. It is triggered by an external voltage or current and can be switched on or off with the application of the appropriate voltage or current.

The specific data is subject to PDF, and the above content is for reference