Allicdata Part #: | S6HVM2.5-ND |
Manufacturer Part#: |
S6HVM2.5 |
Price: | $ 87.80 |
Product Category: | Discrete Semiconductor Products |
Manufacturer: | Semtech Corporation |
Short Description: | DIODE GEN PURP 2.5KV 4A MODULE |
More Detail: | Diode Standard 2500V 4A Chassis, Stud Mount |
DataSheet: | S6HVM2.5 Datasheet/PDF |
Quantity: | 1000 |
10 +: | $ 79.01740 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Active |
Diode Type: | Standard |
Voltage - DC Reverse (Vr) (Max): | 2500V |
Current - Average Rectified (Io): | 4A |
Voltage - Forward (Vf) (Max) @ If: | 3.45V @ 6A |
Speed: | Standard Recovery >500ns, > 200mA (Io) |
Reverse Recovery Time (trr): | 2.5µs |
Current - Reverse Leakage @ Vr: | 2µA @ 2500V |
Capacitance @ Vr, F: | -- |
Mounting Type: | Chassis, Stud Mount |
Package / Case: | Module |
Supplier Device Package: | -- |
Operating Temperature - Junction: | -55°C ~ 150°C |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
S6HVM2.5 is a rectifier (diode) in a small single package, specifically designed for use in bus converters for frequency converters as well as for rectifiers in low/medium frequency SMPS applications. It enables simple, low-cost and efficient designs, and offers improved output voltage accuracy, higher start-up current, lower switching frequency and lower power consumption, as compared to older rectifier technologies.
The S6HVM2.5 is designed to meet the needs of applications requiring a single or multiple diode, such as in-line converters, bridge rectifiers, half-bridge rectifiers and three-phase rectifiers. It has a low forward voltage drop, high surge current rating and low dynamic impedance. It is designed to withstand high reset voltages, which allows it to be used in higher voltage applications, such as 650 VDC, while maintaining a low voltage drop.
The S6HVM2.5 is also designed to reduce conduction losses and switch losses, which makes it a ideal for high frequency applications. It has a wide operating temperature range and is resistant to power cycling and overvoltage, making it suitable for a variety of applications. The S6HVM2.5 features low on-state current leakage, ensuring reliable operation and durability.
The S6HVM2.5 is a desirable device for high voltage and high frequency applications. In addition, it has a low forward voltage drop and high surge current rating, which reduce dynamic impedance. The device also has a wide operating temperature range, making it suitable for both indoor and outdoor uses. The device is resistant to power cycling and overvoltage, making it suitable for a variety of applications.
The S6HVM2.5’s working principle is quite straightforward. The device is mounted on a circuit board or substrate, and has two terminals, the anode (positive) and cathode (negative). When a positive potential is applied to the anode, the device starts to conduct, allowing current to flow from the anode to the cathode. The device keeps conducting until the applied voltage exceeds its current rating, at which point it will switch off. This switching off is referred to as reverse recovery time.
The S6HVM2.5 is a highly reliable device for use in power converters and rectifiers. It features low on-state current leakage and low dynamic impedance, making it suitable for applications requiring high voltage and high frequency operation. It has a wide operating temperature range, making it suitable for both indoor and outdoor applications. The device is resistant to power cycling and overvoltage, making it a good choice for a variety of applications.
The specific data is subject to PDF, and the above content is for reference
Diodes - General Purpose, Power, Switchi...
DIODE SCHOTTKY 40V 500MA SC76Diode Schot...
DIODE GEN PURPOSE DO-204ALDiode
DIODE GEN PURP 400V 1A DO41Diode Standar...
DIODE SCHOTTKY 20V 1A DIE 1=400Diode Sch...
DIODE GEN PURP 400V 500MA D5ADiode Stand...