S7110PB-C3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The S7110PB-C3 is a remote output device that enables local control of the on/off operation of remote equipment. It is widely used in a variety of industrial applications, including factory automation, process control, and building automation. In these applications, the S7110PB-C3 acts as a reliable relay for remotely controlling the operation of process equipment and other devices.

The S7110PB-C3 consists of a main module and two output modules. The main module is a two-wire module that is connected to the input power supply. It has two inputs and eight outputs. Each output module is a stand-alone unit with four outputs. These outputs can be individually controlled by a direct digital output (DDO) command applied to the corresponding pin of the main module. The output modules are distributed across the system in a daisy-chain configurational.

The S7110PB-C3 is a remote output device which enables both local and remote control of the on/off operation of remote equipment. It can be used in a variety of industrial applications, such as factory automation, process control, and building automation. In these applications, the S7110PB-C3 acts as a reliable relay for remotely controlling the operation of process equipment and other devices. The output modules are distributed across the system in a daisy-chain configurational.

The S7110PB-C3 is a device which is activated by input signals. It is designed to receive an input signal (e.g. a logic signal) and then output a corresponding signal which would cause the equipment to either turn off (if the input signal is ‘0’) or turn on (if the input signal is ‘1’). The S7110PB-C3 is designed to be used in a variety of applications. The most common applications include factory automation, process control, and building automation.

The S7110PB-C3 has two input signals, one for the ‘0’ state (off) and one for the ‘1’ state (on). It also has eight output signals, which can independently control the operation of the connected equipment. This is achieved via direct digital output (DDO) commands. In addition, the S7110PB-C3 is also equipped with a built-in self-controlling timer, which can be used to control the timing of the output signals.

The S7110PB-C3 is designed to be easily installed and used. It has a simple, straightforward wiring system and a user-friendly interface. It is also designed for safety and reliability; it has multiple voltage protection, and it is capable of operating in a wide temperature range. Additionally, it is certified with CE/RoHS/CUL standards, further ensuring a long-lasting and reliable operation.

To sum up, the S7110PB-C3 is a reliable, efficient and versatile remote output device. It is capable of providing remote control of the on/off operation of equipment in a variety of industrial applications. It is designed to be easy to install and use and is certified with CE/RoHS/CUL standards, ensuring a long-lasting and reliable operation. It is an invaluable tool for industrial applications.

The specific data is subject to PDF, and the above content is for reference