Allicdata Part #: | SA2G-E3/5AT-ND |
Manufacturer Part#: |
SA2G-E3/5AT |
Price: | $ 0.05 |
Product Category: | Discrete Semiconductor Products |
Manufacturer: | Vishay Semiconductor Diodes Division |
Short Description: | DIODE GEN PURP 400V 2A DO214AC |
More Detail: | Diode Standard 400V 2A Surface Mount DO-214AC (SMA... |
DataSheet: | SA2G-E3/5AT Datasheet/PDF |
Quantity: | 1000 |
7500 +: | $ 0.04167 |
Series: | -- |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Diode Type: | Standard |
Voltage - DC Reverse (Vr) (Max): | 400V |
Current - Average Rectified (Io): | 2A |
Voltage - Forward (Vf) (Max) @ If: | 1.1V @ 2A |
Speed: | Standard Recovery >500ns, > 200mA (Io) |
Reverse Recovery Time (trr): | 1.5µs |
Current - Reverse Leakage @ Vr: | 3µA @ 400V |
Capacitance @ Vr, F: | 11pF @ 4V, 1MHz |
Mounting Type: | Surface Mount |
Package / Case: | DO-214AC, SMA |
Supplier Device Package: | DO-214AC (SMA) |
Operating Temperature - Junction: | -55°C ~ 150°C |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
A single rectifier is one of the most widely used components in electricity and electronics. The SA2G-E3/5AT, a single rectifier diode, is often used in many applications, ranging from power supplies, high-end audio and motor controls to small consumer electronics and even medical equipment.
The SA2G-E3/5AT diode is of the General Purpose variety, and has a reverse voltage rating of 5 Amps (A) at 50 volt (V). It is similar to a normal diode in that it is a single semiconductive material with two electrodes, but instead of a switch it uses a junction of n-type and p-type silicon that stops the current flow in one direction and allows it in the other. The most common applications for the SA2G-E3/5AT are rectification and inversion.
In a rectification application, the diode is used to filter the AC power to create DC power by only allowing the positive half-cycles of the AC signal to pass through. This removes the negative half-cycles, effectively turning the AC signal into DC power. Rectification is often used in power supplies, charging devices, and other applications that require a steady DC power supply.
In an inversion application, the diode is used to create a pulsed DC power supply because it prevents the current from flow in one particular direction. This is commonly used in motor applications and audio amplifiers where the DC power is pulsed on and off and the amount of power delivered is controlled by the duty cycle. It is also used in small consumer electronics and medical equipment, where a steady and reliable DC power is required.
The SA2G-E3/5AT diode is popular due to its convenience and ease of use, but also due to its relatively low cost. It is a reliable and effective diode that can be used for a variety of applications, from power supplies and inversion to audio and motor controls. When used properly and within the limits of its ratings, the SA2G-E3/5AT can be an excellent choice for many power electronics needs.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
SA2G-E3/5AT | Vishay Semic... | 0.05 $ | 1000 | DIODE GEN PURP 400V 2A DO... |
SA2G-E3/61T | Vishay Semic... | 0.06 $ | 1000 | DIODE GEN PURP 400V 2A DO... |
SA2G-M3/5AT | Vishay Semic... | 0.05 $ | 1000 | DIODE GPP 2A 400V DO-214A... |
SA2G-M3/61T | Vishay Semic... | 0.05 $ | 1000 | DIODE GPP 2A 400V DO-214A... |
Diodes - General Purpose, Power, Switchi...
DIODE SCHOTTKY 40V 500MA SC76Diode Schot...
DIODE GEN PURPOSE DO-204ALDiode
DIODE GEN PURP 400V 1A DO41Diode Standar...
DIODE SCHOTTKY 20V 1A DIE 1=400Diode Sch...
DIODE GEN PURP 400V 500MA D5ADiode Stand...