Allicdata Part #: | 568-3570-5-ND |
Manufacturer Part#: |
SA5217D/01,112 |
Price: | $ 0.00 |
Product Category: | Integrated Circuits (ICs) |
Manufacturer: | NXP USA Inc |
Short Description: | IC POST AMP W/LINK STAT 20SOIC |
More Detail: | Postamplifier IC Optical Networks 20-SO |
DataSheet: | SA5217D/01,112 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Tube |
Part Status: | Obsolete |
Type: | Postamplifier |
Applications: | Optical Networks |
Mounting Type: | Surface Mount |
Package / Case: | 20-SOIC (0.295", 7.50mm Width) |
Supplier Device Package: | 20-SO |
Base Part Number: | SA5217 |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Linear - Amplifiers - Special Purpose
The SA5217D/01,112 is a linear amplifier that is considered special purpose because of its dedicated applications. This type of amplifiers is used in RF signal amplification at UHF frequencies and is a popular choice for both commercial and military applications. It is designed to provide low frequency and wideband operation to give access to a wide range of signal types. This amplifier also offers signal-to-noise ratio that is both stable and reliable.
Applications
The SA5217D/01,112 is designed to be used in a wide variety of applications in the UHF field, including communications systems, direct connection of A/D and D/A converters, signal processing, signal transmission, and frequency synthesis. This amplifier also works well for signal reception and signal tracking. Additionally, this amplifier has found applications in a wide range of military systems for signal processing and transmission. These applications include missile guidance, tracking, and control systems, radar systems, and electronic warfare systems.
Working Principle
The SA5217D/01,112 is a two-stage, direct coupled, DC-coupled amplifier with a single-ended input and output. The input and output resistors are used to terminate the signal connections. The amplifier is designed to produce a wide bandwidth over a wide range of frequencies, with diminishing gain at higher frequencies. The first stage is designed to give a high gain at low frequencies, while the second stage is designed to give maximum gain at high frequencies and a high stability factor.
The first stage and the second stage operate with different biasing voltages, which control the operating points of the amplifier. The gate bias voltage, and the emitter supply voltage are set to provide the desired gain and stability. The resistor network that connects the input and output of the amplifier to the external circuit is used to suppress noise and provide instability protection.
The two operating points of the amplifier are set to temperature by the offset trim circuit. This circuit also allows for manual adjustment of the gain. The oscillator at the output of the amplifier is used to provide low frequency stabilization and to suppress spurious signals. The amplifier is designed to operate from a single power supply, with a voltage range of 6 to 24V.
Conclusion
The SA5217D/01,112 is a special purpose amplifier designed for use in RF signal amplification at UHF frequencies. It has found applications in both commercial and military systems, and is designed to provide low frequency and wideband operation. The amplifier is designed to give a high gain at low frequencies, while the second stage provides maximum gain at high frequencies and stability. The offset trim circuit allows for manual adjustment of the gain, and the oscillator at the output is used to provide low frequency stabilization and to suppress spurious signals.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
SA52-11EWA | Kingbright | 0.55 $ | 1000 | DISPLAY 627NM RED NUMERIC... |
SA52-11GWA | Kingbright | 0.55 $ | 1000 | DISPLAY 565NM GRN NUMERIC... |
SA52-11SRWA | Kingbright | 0.58 $ | 1000 | DISPLAY 660NM RED NUMERIC... |
SA5230DR2G | ON Semicondu... | 0.48 $ | 1000 | IC OPAMP GP 600KHZ RRO 8S... |
SA5234D/01,518 | NXP USA Inc | 0.0 $ | 1000 | IC OPAMP GP 2.5MHZ RRO 14... |
SA5234D/01,512 | NXP USA Inc | 0.0 $ | 1000 | IC OPAMP GP 2.5MHZ RRO 14... |
SA5217D/01,112 | NXP USA Inc | 0.0 $ | 1000 | IC POST AMP W/LINK STAT 2... |
SA5217D/01,118 | NXP USA Inc | 0.0 $ | 1000 | IC POSTAMP 75MHZ 20SOICPo... |
SA5230D | ON Semicondu... | 0.0 $ | 1000 | IC OPAMP GP 600KHZ RRO 8S... |
SA5230DR2 | ON Semicondu... | 0.0 $ | 1000 | IC OPAMP GP 600KHZ RRO 8S... |
SA5230N | ON Semicondu... | 0.0 $ | 1000 | IC OPAMP GP 600KHZ RRO 8D... |
SA5230NG | ON Semicondu... | 0.0 $ | 1000 | IC OPAMP GP 600KHZ RRO 8D... |
SA5213SLK | NXP USA Inc | 0.0 $ | 1000 | KIT STUDENT LEARNING M521... |
SA5219D,602 | NXP USA Inc | 0.0 $ | 1000 | IC VGA 700MHZ 16-SOICVide... |
SA5230DG | ON Semicondu... | 1.25 $ | 266 | IC OPAMP GP 600KHZ RRO 8S... |
IC OP AMP VOLT COMPARATOR 8-DIPAmplifier...
IC AMP POST PECL 3.3V/5V 10-MSOPLimiting...
IC POST AMP HS LIMITING 10-MSOPLimiting ...
IC AMP CURRENT SENSE 8MSOPAmplifier, Com...
IC OPAMP/COMP/REF MICROPWR 8-DFNAmplifie...
IC POSTAMP 75MHZ 20SOICPostamplifier IC ...