SA6.0ARL

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SA6.0ARL is a transient voltage suppression device, commonly known as a TVS diode, and it is used to protect electronic circuits from voltage-induced damage or surges. It is a small, disk-shaped device that is mounted in the circuit, and it functions by discharging any voltage that is higher than the rated protection level, helping to protect the circuit from outright destruction.

The TVS diode operates by allowing a small amount of current to flow through it and this creates a voltage drop which in turn helps to reduce the amount of voltage that is going to the circuit. In order for it to work, the TVS diode must have a breakdown voltage that is equal to or more than the amount of energy that the circuit is likely to face. This breakdown voltage is usually much lower than the input voltage and works to keep the current from overtaking the circuit.

The SA6.0ARL is an unidirectional diode which means that its peak power rating only applies in one direction. It has a peak power rating of 600 watts with a 9.6 volt peak reverse voltage. The forward current rating is determined by the peak pulse current and the repetition rate of the pulses, and the device is designed to handle up to 10000 volts. It is also designed to be resistant to high levels of heat, making it well suited for high-power applications.

The application field for the SA6.0ARL is quite wide, and it is used in a variety of different electronic circuits and devices. These include semiconductor chip protection, protection for high-end gaming consoles, and even protection for communication devices. It is also used in automobile applications, such as cars and trucks, to protect on-board electronics from voltage surges.

When it comes to its working principle, it is important to understand that a TVS diode works in much the same way as a normal diode, with the exception that it has a breakdown voltage which is much lower than the forward voltage. When a voltage spike or surge occurs, the TVS diode absorbs the excess voltage and diverts it away from sensitive components. This helps to protect the circuit from damage and helps to extend its life.

In summary, the SA6.0ARL is a widely used TVS diode which is used to protect electronic circuits from voltage surges and other related damage. It has a peak power rating of 600 watts and a peak reverse voltage of 9.6 volts. Its application field is quite diverse and it is used in a variety of different electronics, and its working principle functions by allowing the voltage to be diverted away from sensitive components.

The specific data is subject to PDF, and the above content is for reference