SA606DK,112

Series:	SA606
Packaging:	Tube
Part Status:	Obsolete
RF Type:	Cellular, ASK, FSK, VHF
Frequency:	150MHz
Number of Mixers:	2
Gain:	17dB
Noise Figure:	6.2dB
Secondary Attributes:	Up Converter
Current - Supply:	4.2mA
Voltage - Supply:	2.7 V ~ 7 V
Package / Case:	20-LSSOP (0.173", 4.40mm Width)
Supplier Device Package:	20-SSOP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to RF Mixers and SA606DK,112 ApplicationsRF Mixers are electronic components that are used to combine signal frequencies from two or more sources, to produce an output signal with a frequency different from that of any of the sources. The mixing of signals from two or more sources is generally done using a non-linear device such as a diode, or a transistor, or even a pair of transistors. Mixers are commonly used in radiofrequency (RF) designs to convert a signal from one frequency to another. This type of design is referred to as frequency conversion. One of the common uses of mixers is in RADAR systems, for which mixers convert the frequency of the transmitted signal from the frequency of the receiver. They can also be utilized for mixing signals from two different frequency sources to create a new signal which can then be used as an input to a system or application. The main functions of the SA606DK,112 are amplifiers, frequency downconversion mixers, and frequency up-conversion mixers. The SA606DK,112 is a series of amplifiers and mixers from Texas Instruments, which were designed for use in both transmitting and receiving applications. These devices are ideal for applications such as wireless receivers and transmitter systems, satellite communications, and automotive radar systems. They are highly integrated and consume less power than other similar devices.The frequency down-conversion mixers in the SA606DK,112 allow signals from different frequency sources to be down-converted to a single frequency output. This type of mixer can be used in Wireless LAN (WLAN) receivers, which require a wide range of signal frequencies to be incorporated into a single output frequency. The frequency-up conversion mixers are used in transmitters, which require an input from a wide range of frequencies to be up-converted to a single output frequency. The SA606DK,112 mixers are designed using advanced CMOS technology and contain both the RF and IF circuits required for carrying out the frequency conversion. These functions are then integrated into the device, resulting in low power consumption and increased efficiency. The RF input impedance of the device is typically 50 ohms, which allows for convenient RF design considerations in the application. The IF input and output amplifiers are differential, and allow for improved signal-to-noise performance in the application. The differential IF amplifiers also provide improved rejection of common mode signals. In addition to the frequency conversion functionality, the SA606DK,112 also contains a balance detector which helps improve the third-order intermodulation performance of the device. This, in turn, allows for robust operation in a wide range of applications in which the device is used.ConclusionThe SA606DK,112 series of integrated amplifiers and mixers from Texas Instruments are highly efficient and consume less power compared to other similar devices. These devices are ideal for applications such as wireless receivers and transmitter systems, satellite communications, and automotive radar systems. Differential amplifiers are integrated into the device which improves signal-to-noise performance and also helps to reject common-mode signals. Additionally, the balance detector helps to improve the third-order intermodulation performance of the device. Therefore, the SA606DK,112 makes the ideal choice for a variety of RF-mixer applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description