Allicdata Part #: | SAO-Q1N-ND |
Manufacturer Part#: |
SAO-Q1N |
Price: | $ 153.69 |
Product Category: | Industrial Controls |
Manufacturer: | Omron Automation and Safety |
Short Description: | SENSOR CURRENT 100/110/120VAC |
More Detail: | N/A |
DataSheet: | SAO-Q1N Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 139.70900 |
Series: | SAO |
Part Status: | Active |
Type: | Current Sensing AC |
Trip Status: | -- |
Trip Range: | -- |
Delay Time: | No Delay |
Voltage - Supply: | 100 ~ 120VAC |
Output Type: | Relay |
Circuit: | SPDT (1 Form C) |
Contact Rating @ Voltage: | 3A @ 240VAC |
Mounting Type: | Socketable |
Operating Temperature: | -10°C ~ 60°C |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
SAO-Q1N, with its varied application field and working principle, falls into the Monitor - Current/Voltage - Relay Output category. Its On-Off type of output is suited for when a relay is needed.
SAO-Q1N is designed to monitor AC and DC current, voltage and frequency values, as well as to detect transient voltage changes, power and power factor. It also has widespread applications, including verifying if voltage upstream of an installation phase has been accidentally reversed, as well as for start/stop control of any load.
SAO-Q1N has a dynamic response due to its fast electronics that can set and reset the relay at an adjustable small time delay, depending on the user’s requirement. Aside from this, the current monitored begins to affect the relay after a fifth of a cycle, and it is ready to switch the load in one cycle.
In general, there are three distinct stages necessary for SAQ-Q1N application. For the first phase, the parameters such as current-voltage-frequency, must be setup. This process is also known as “measuring mode”, and it allows the user to set up relay switch points and delay times within a second or two.
The second phase is “switch mode” initiated by the unit: this mode allows the user to set the touchpoints and to choose the type of relay switch point. The third stage, “relay edit mode”, is supervised by the user and allows him to make time adjustments on the relay response after the initial setup.
These three essential phases can be cycled when necessary by the user in order to create an adjustable contact between normal and defective values. In addition, the output’s characteristics are monitored and analyzed so that no false signals are generated due to noise.
SAO-Q1N is a reliable and secure current/voltage/frequency relaying monitoring system designed for protecting equipment from voltage and current anomalies or incidences beyond their operation specification. This device has the ability to identify user-defined ranges, and this can be used for consumer/producer system, or on energy distribution panels, protection purposes, or control equipment.
When using SAO-Q1N, safety is a key factor because it has the ability to detect and react faster than the reaction time of an individual, thus giving extra security. It also provides additional measurements such as phase shift, power factor, transient voltage changes, frequency variation, and voltage outs and ins, further improving the safety level.
Finally, the interface between the system and SAO-Q1N is also quite easy with digital displays and configurable outputs. The user can choose one of the three available output protocols: low, mid or high level, and can also choose the type of data processing algorithm that best suits his needs.
With its variety of user-friendly features, such as fast reaction time, user-defined ranges, adjustable contact between normal and defective values, and digital displays with configurable outputs, SAO-Q1N is an easy-to-use and reliable current/voltage/frequency monitoring system.
The specific data is subject to PDF, and the above content is for reference
CURRENT SWITCH 5-50A
21-890=WILMAR POWER MONITOR
RELAY CUR SENSE 24VDC 5-5A
REL AC GROUND FAULT SENS 120VAC
3-PHASE OVER/UNDER VOLT RLY
TACH RLY 300 RPM 115V