SATAULC6-2M6

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SATALC6-2M6 TVS (Transient Voltage Suppressor) diode is designed to protect sensitive electronic circuits from damage caused by electrical transients and surges. It is intended for use in local and distributed Telecom and Data communication networks. The TVS diode has two main components: the diode (the semiconductor device) and the off-state impedance (usually a resistor-capacitor network).

The SATALC6-2M6 diode is made up of two silicon dies, each with a PN junction. The silicon die is typically mounted in a package with an internal connection to ground. When an over-voltage transient occurs, the diode begins to conduct, clamps the voltage, and absorbs the current. Since the diode has an internal impedance, the current carrying capacity of the diode is limited. In order to effectively protect the application, this current carrying capacity must be equal to or higher than the maximum possible transient current.

The internal resistance of the diode is the off-state impedance. Generally, the off-state impedance is designed to present a much higher impedance than the diode. In most cases, the internal resistance can be set to a very low value, typically around 10 – 50Ω. This internal resistance helps to reduce the voltage drop across the diode as the current increases. It also limits the total current that the diode can handle. In order to ensure that the diode can handle the maximum possible transient current that it will be exposed to, a resistor-capacitor network is added to the circuit.

The SATALC6-2M6 TVS diode is designed for wireless communication and cell tower applications. It is ideal for use in Point-to-Point (PTP), Point-to-Multipoint (PMP), Local Area Network (LAN) and Global System for Mobile Communications (GSM) applications. It has a low turn-on voltage of 6V and a maximum breakdown voltage of 20V, making it suitable for a wide range of applications.

In addition to applications in the telecom and data communication industry, the SATALC6-2M6 diode is also used in the automotive industry and in consumer electronics. In the automotive industry, it is used to protect control circuits and chargeable batteries. In consumer electronics, it is used to protect circuits and components from voltage spikes and surges.

The SATALC6-2M6 TVS diode is a great choice for protecting circuits and components from voltage transients and surges. Its low turn-on voltage and high breakdown voltage makes it suitable for a wide range of applications. It is designed to provide protection while allowing for high current carrying capability.

The specific data is subject to PDF, and the above content is for reference