SB007-03C-TB-E Discrete Semiconductor Products

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SB007-03C-TB-E is a single diode rectifier, commonly used for AC and DC power distribution. It is a small device, typically rated for up to 5 Amps and a peak forward surge current rating of 30 Amps, making it ideal for use in a wide range of applications.

The most common application of the SB007-03C-TB-E is as a bridge rectifier in an AC/DC power supply. When connected across an AC power source, it allows only one half of each alternating cycle through to the load. This allows a relatively inexpensive, single component solution to turn AC power into usable DC power.

In addition to this, the SB007-03C-TB-E can also be used for power factor correction in high frequency, AC-DC switching power supplies. By using this device, power factor can be improved, leading to a more efficient and reliable power supply design.

The SB007-03C-TB-E is also commonly used in DC-DC converters. By connecting two of these rectifiers in series, it is possible to create a bi-directional bridge rectifier stage. This can be used to convert a higher-level DC voltage into a lower-level voltage, making it ideal for applications such as battery charging.

The SB007-03C-TB-E also finds applications in voltage-clamping and peak-rectifying applications. By connecting the device across a load, it will effectively clamp the voltage across the load to the peak reverse voltage rating of the diode. This means that the voltage across the load will never be higher than the peak reverse voltage rating of the diode, protecting the load from any overvoltage situations.

As the SB007-03C-TB-E is a single component, it is relatively simple to integrate into a design. This makes it ideal for applications where cost and complexity need to be kept to a minimum. The device is also relatively robust, making it suitable for use in a range of industrial and consumer applications.

The working principle of the SB007-03C-TB-E is simple. When connected in a circuit, the device will allow current to flow in one direction only. When a positive voltage is applied to the anode of the diode, it will allow the current to flow from the anode to the cathode. When a negative voltage is applied to the anode of the diode, it will not allow current to flow, effectively blocking the voltage. This makes the SB007-03C-TB-E suitable for a range of AC and DC power distribution applications, as well as voltage-clamping and peak-rectifying applications.

The specific data is subject to PDF, and the above content is for reference