SB6100-110-0

Series:	Shock-Block™ SB6000
Part Status:	Active
Lead Free Status / RoHS Status:	--
Type:	--
Specifications:	240V

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Ground Fault Circuit Interrupter (GFCI)A Ground Fault Circuit Interrupter (GFCI) is an electrical circuit breaker device designed to protect people from electric shock hazards. The GFCI is designed to trip and disconnect power automatically when it detects the current leaving and returning to a circuit is not balanced. This indicates a ground fault, an electric shock hazard, or an overload has occurred. The GFCI detects minute imbalances in the electric current that normally occurs when two conductors contact each other, thus protecting people from electric shocks or burnouts. The SB6100-110-0 GFCI is a UL943 and UL853 approved Ground Fault Circuit Interrupter. It is designed for use in 120VAC 15-amp and 20-amp circuits. The SB6100-110-0 has a form factor of 2-Pole, 3-Wire, and also functions as a 20 amp manual reset device. The SB6100-110-0 is designed to detect ground faults and interrupt the power automatically in residential and light commercial installations. The working principle of the SB6100-110-0 is based on differential current detection. During normal under-load operation, the device continuously monitors the current flow from the line side to the load side and within the circuit. When an imbalance is detected (such as a ground fault), the device trips and interrupts power. The device has a built-in test button which, when activated, will cause the device to simulate a ground fault condition. This allows for easy verification of proper installation and helps prevent accidental disconnection due to improper installation.The SB6100-110-0 has a variety of applications. It can be used in commercial and residential applications such as air conditioners, built-in ovens, hot tubs, pools, washing machines, dryers, bathrooms, and other areas where ground fault protection is required. It can also be used in industrial and commercial applications such as factory, laboratory, and medical applications. The SB6100-110-0 is designed to protect you and your family from the risk of electric shock of any type. Its automatic shutdown feature is designed to protect against thermal overloads, ground faults, phase faults, incorrect wiring, and imbalances caused by electrical faults. The device monitors current and operation continuously and automatically disconnects power when an imbalance or fault occurs.To ensure a safe installation and proper function of the device, all wiring must be installed and tested according to local codes and manufacturer’s instructions. In addition, all applicable building codes must be followed when installing the device. In order to maintain optimum protection, the GFCI must be tested regularly. The SB6100-110-0 GFCI is an important addition to any residential, commercial, or industrial setting to safeguard against ground fault and electrical shock risks. By combining advanced sensing technology with fast reaction times, the SB6100-110-0 provides superior protection at a competitive price.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description