Allicdata Part #: | SBL4R018J-ND |
Manufacturer Part#: |
SBL4R018J |
Price: | $ 0.34 |
Product Category: | Resistors |
Manufacturer: | TE Connectivity Passive Product |
Short Description: | RES 0.018 OHM 4W 5% AXIAL |
More Detail: | 18 mOhms ±5% 4W Through Hole Resistor Axial Curren... |
DataSheet: | SBL4R018J Datasheet/PDF |
Quantity: | 1000 |
1000 +: | $ 0.30918 |
Series: | SBL, CGS |
Packaging: | Bulk |
Part Status: | Active |
Resistance: | 18 mOhms |
Tolerance: | ±5% |
Power (Watts): | 4W |
Composition: | Metal Foil |
Features: | Current Sense, Non-Inductive |
Temperature Coefficient: | ±240ppm/°C |
Operating Temperature: | -55°C ~ 250°C |
Package / Case: | Axial |
Supplier Device Package: | Axial |
Size / Dimension: | 0.252" Square x 0.709" L (6.40mm x 18.00mm) |
Height - Seated (Max): | -- |
Number of Terminations: | 2 |
Failure Rate: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Through Hole Resistors are large-sized, axially-mounted components which are typically used for high-voltage applications due to their relatively large size and mounting requirements. The SBL4R018J is a through hole resistor which is designed to handle up to 45v. It is a non-inductive device and features low thermal resistance, high power rating and low-noise operation. The SBL4R018J is ideal for audio/visual applications, audio-frequency amplifiers, high-frequency amplitude modulation and power supply regulation.
The SBL4R018J works on the principle of voltage division. This means that the voltage applied to the two terminals of the resistor is divided based on the resistor’s Ohm rating. For instance, if the resistor is rated at 10,000 ohms, a voltage of 10V applied across its terminals will result in 5V at one terminal and 0V at the other. This type of resistor is commonly used as a voltage divider in circuits that require a certain voltage level.
In addition to being used as a voltage divider, the SBL4R018J is commonly used to control the flow of current in a circuit. When installing the SBL4R018J in a circuit, it is important to ensure that the current does not exceed the maximum rating of the resistor. Exceeding the maximum rating can cause the resistor to overheat and become damaged. As an additional safety precaution, it is often recommended to use a power resistor in conjunction with the SBL4R018J in order to limit the amount of current flowing through the resistor.
In terms of application, the SBL4R018J can be used to provide protection to sensitive electronic components in high-voltage circuits. As a through hole resistor, it is also suitable for general purpose applications, such as in amplifier circuits, switching circuits or surge suppression circuits. Additionally, the high power rating of the SBL4R018J means that it can be used in higher power applications, such as motor control, power supply regulation or AC/DC inverter circuits.
The SBL4R018J is a through hole resistor which is designed to handle high-voltage applications. It works on the principle of voltage division and is commonly used as a voltage divider in circuits that require certain voltage levels. Additionally, it can be used to control the flow of current in a circuit and is suitable for general purpose applications, such as in amplifier circuits, surge suppression circuits and AC/DC inverter circuits. This makes the SBL4R018J ideal for use in a wide range of high-voltage applications.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
SBL4R018J | TE Connectiv... | 0.34 $ | 1000 | RES 0.018 OHM 4W 5% AXIAL... |
SBL4-2 | 0.08 $ | 6300 | RIVET BLIND 0.275" STEEL ... | |
SBL4-4 | 0.08 $ | 7200 | RIVET BLIND 0.400" STEEL ... | |
SBL4-6 | 0.1 $ | 1600 | RIVET BLIND 0.525" STEEL ... | |
SBL4R004F | TE Connectiv... | 0.68 $ | 1000 | RES 0.004 OHM 4W 1% AXIAL... |
SBL4R007F | TE Connectiv... | 0.68 $ | 1000 | RES 0.007 OHM 4W 1% AXIAL... |
SBL4R015F | TE Connectiv... | 0.68 $ | 1000 | RES 0.015 OHM 4W 1% AXIAL... |
SBL4R033F | TE Connectiv... | 0.68 $ | 1000 | RES 0.033 OHM 4W 1% AXIAL... |
SBL4R005F | TE Connectiv... | 0.68 $ | 1000 | RES 0.005 OHM 4W 1% AXIAL... |
SBL4R051F | TE Connectiv... | 0.68 $ | 1000 | RES 0.051 OHM 4W 1% AXIAL... |
SBL4R022F | TE Connectiv... | 0.68 $ | 1000 | RES 0.022 OHM 4W 1% AXIAL... |
SBL4R022J | TE Connectiv... | 0.81 $ | 1538 | RES 0.022 OHM 4W 5% AXIAL... |
SBL4R01J | TE Connectiv... | 0.81 $ | 3458 | RES 0.01 OHM 4W 5% AXIAL1... |
SBL4R015J | TE Connectiv... | 0.81 $ | 1588 | RES 0.015 OHM 4W 5% AXIAL... |
SBL4R051J | TE Connectiv... | 0.81 $ | 981 | RES 0.051 OHM 4W 5% AXIAL... |
SBL4R005J | TE Connectiv... | 0.81 $ | 790 | RES 0.005 OHM 4W 5% AXIAL... |
SBL4R047J | TE Connectiv... | 0.81 $ | 39 | RES 0.047 OHM 4W 5% AXIAL... |
SBL4R033J | TE Connectiv... | 0.81 $ | 232 | RES 0.033 OHM 4W 5% AXIAL... |
SBL4030PT-E3/45 | Vishay Semic... | -- | 1000 | DIODE ARRAY SCHOTTKY 30V ... |
SBL4040PT-E3/45 | Vishay Semic... | -- | 1000 | DIODE ARRAY SCHOTTKY 40V ... |
SBL4030PT | Diodes Incor... | -- | 1000 | DIODE ARRAY SCHOTTKY 30V ... |
SBL4035PT | Diodes Incor... | 0.0 $ | 1000 | DIODE ARRAY SCHOTTKY 35V ... |
SBL4040PT | Diodes Incor... | -- | 1000 | DIODE ARRAY SCHOTTKY 40V ... |
SBL4045PT | Diodes Incor... | -- | 1000 | DIODE ARRAY SCHOTTKY 45V ... |
SBL4050PT | Diodes Incor... | 0.0 $ | 1000 | DIODE ARRAY SCHOTTKY 50V ... |
SBL4060PT | Diodes Incor... | -- | 1000 | DIODE ARRAY SCHOTTKY 60V ... |
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...