SBRS8130LT3G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SBRS8130LT3G is a single rectifier diode developed by Vishay Intertechnology One of its primary functions is to convert an alternating current (AC) to direct current (DC). Single rectifier diodes are capable of unidirectional current flow and can be used to limit the amount of current between two points.

The SBRS8130LT3G is a bidirectional diode device. Its maximum reverse voltage is rated at 830 Volts, and its maximum average forward current is 31 Amps. The forward voltage drop of this device is 1.3 Volts, and its maximum non-repetitive peak forward surge current is 225 Amps. It also features a low reverse leakage current of 5 microamperes.

This SBRS8130LT3G rectifier diode is typically used in applications such as DC-DC converters, power supplies, automotive applications, and conditioning systems. It can also be used in protection circuits that provide electrical overcurrent protection and act as a transistor on/off switch. When an excessive current is passed through the diode, it will enter a reversed biased state, allowing a large amount of current to pass, thus preventing further damage.

The SBRS8130LT3G rectifier diodes work in accordance with the V-I characteristic curve of a diode. The forward voltage drop of this diode is 1.3 volts and it passes all the current in the forward bias. This means that when a voltage is applied in the forward bias, current flows in the forward direction. In the reverse bias, the device blocks the flow of current.

The rectifier diode is used to convert AC to DC by using a bridge rectifier circuit. In this configuration, the diode will conduct during the positive half-cycle of the AC supply. During the negative half-cycle of the AC supply, the diode will be reverse biased and thus non-conducting. This allows for the conversion of AC to DC. The DC output obtained from the bridge rectifier circuit is pulsating DC and must be filtered in order to obtain DC output.

The SBRS8130LT3G rectifier diode is also used in voltage multipliers, frequency multipliers, rectifiers, and clippers. In a voltage multiplier, the diode multiplies the input voltage and smoothes out the voltage changes. In a frequency multiplier, the diode rectifies the input frequency and allows only half-cycles of the input signal to be outputted. In a rectifier circuit, the diode allows only half-cycles of the AC voltage to pass, thus converting AC to DC. In a clipper, the diode clips off the excess voltage. This helps to maintain a constant output voltage.

In conclusion, the SBRS8130LT3G is a single rectifier diode designed to convert AC to DC and provide electrical overcurrent protection. It is used in many applications such as DC-DC converters, power supplies, automotive applications, and conditioning systems. The rectifier diode works in accordance with the V-I characteristic curve of a diode and is used in circuitry such as bridge rectifiers to convert AC to DC, voltage multipliers, frequency multipliers, rectifiers, and clippers.

The specific data is subject to PDF, and the above content is for reference