SBSMP5000472MXR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SBSMP5000472MXR is a type of EMI/RFI filter, specifically a low pass filter. This filter is used to reduce interference from high frequency signals that can cause system noise. It is typically used in communication applications and high power transmission lines to reduce or eliminate any noise generated from the high frequency signals. This type of filter is commonly referred to as an "RC network", as it consists of resistors, capacitors, and inductors. The filter can also be referred to as an "LC filter" since it also uses inductors in its design.

The SBSMP5000472MXR filter is a band-stop filter with a very wide frequency range of 10 kHz to 2 GHz. It offers high attenuation performance with insertion loss of up to 65dB. The filter has an operating temperature range from -55C to +125C. It is also rated for a high voltage of 350 V RMS (root mean square) and power dissipation of 2.5 Watts.

The SBSMP5000472MXR filter also has a very high SNR (signal-to-noise ratio) performance, allowing it to dampen disturbances of 10W or less. The filter also features a very low ESR (equivalent series resistance) of 0.1 Ohm, making it suitable for applications requiring a low DC resistance. The filter also has a wide gain flatness, ensuring uniform response throughout the entire frequency range.

The working principle of the SBSMP5000472MXR filter is based on its components. The inductor in the filter has a low inductive reactance, which allows it to reject high frequency noise. The resistors in the filter act as an impedance so that the current in the circuit is limited. The capacitors in the filter act as a short circuit, allowing the circuit to pass low frequency signals while blocking the high frequency ones.

In conclusion, the SBSMP5000472MXR is a type of EMI/RFI filter, specifically a low pass filter. This filter offers high attenuation performance and SNR performance, allowing it to effectively reduce or eliminate any noise generated from the high frequency signals. The filter’s components work together to block the high frequency signals, while allowing the low frequency signals to pass through. The SBSMP5000472MXR filter is ideal for communication applications and high power transmission lines, where interference from high frequency signals can cause system noise.

The specific data is subject to PDF, and the above content is for reference