SC1485ITSTRT Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SC1485ITSTRT application field and its working principle can mainly be classified under PMIC – Voltage Regulators – DC DC Switching Controllers. SC1485ITSTRT is a Monolithic Synchronous Buck DC/DC Controller that uses digital current mode control with a unique constant on-time architecture to improve efficiency and reduce design complexities. With an operating frequency of up to 3.2MHz, the SC1485ITSTRT provides tight load regulation without the need for an external compensation network. It also integrates synchronous gate drivers for both low-side and high-side MOSFETs with all necessary protection and fault detection circuitry included, further simplifying the design.

The SC1485ITSTRT is suitable for point of load DC/DC buck applications between 1.5V and 4.5V with up to 4A output current. The device is designed specifically to reduce external component count and cost. This is accomplished through its Digitally Controlled Current Mode (DCCM) topology with robust features such as a DAC-controlled current limit and programmable switching frequency. This makes it suitable for a wide range of applications including data mini-servers, telecom and networking systems, set-top boxes, notebook PCs, and instrumentation and industrial applications. Additionally, the device operates with a single package supply voltage of up to 4.5V, making it ideally suited for applications such as 3.3V, 12V and 24V input systems.

The primary purpose of the SC1485ITSTRT is to regulate a power input and output throughout a wide operating frequency range. It adjusts to the optimal frequency which helps in supporting either constant output current or constant power, depending on the application requirements. Through constant Voltage, Current and Frequency (VCF) modulation, the device inherently provides a low-ripple output. It also has the flexibility to operate in different modes such as PWM PFM, dc-dc conversion, and step down/up topologies.

The SC1485ITSTRT working principle depends on a differential amplifier which compares the input voltage and the feedback voltage output. If a difference between the two is detected, then the output is enabled via a logic OR gate and a set of open drain transistors. This logic OR gate also controls a pair of low side and high side MOSFETs via a pair of PWM drivers, which can be programmed to toggle the MOSFETs at a rate equal to the switching frequency. The result is the power conversion of a DC voltage, which is then outputted at the desired voltage.

On top of the features that make it an attractive choice for DC/DC power Conversion, the SC1485ITSTRT also offers comprehensive fault protection mechanisms. In the event of substandard output, the device will actively shut down and issue one or more fault conditions, depending on the fault condition detected. The SC1485ITSTRT also provides a programmable under-voltage lockout (UVLO) with hysteresis, over-voltage protection (OVP), and adjustable over-temperature protection (OTP).

All in all, the SC1485ITSTRT is a versatile device for DC−DC conversion. It can easily be used in a wide range of automotive, telecom and industrial applications, where high efficiency and robust fault protection are key considerations. The device is extremely user-friendly, with intuitive control and programmable features, as well as comprehensive fault detection features. It also provides an increased operational efficiency and a reduced external component count, while still delivering consistent and accurate power conversion.

The specific data is subject to PDF, and the above content is for reference