Allicdata Part #: | SC9328MXSVP15-ND |
Manufacturer Part#: |
SC9328MXSVP15 |
Price: | $ 0.00 |
Product Category: | Integrated Circuits (ICs) |
Manufacturer: | NXP USA Inc |
Short Description: | IC MPU I.MXS 150MHZ 225BGA |
More Detail: | ARM920T Microprocessor IC i.MXS 1 Core, 32-Bit 150... |
DataSheet: | SC9328MXSVP15 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Ethernet: | -- |
Base Part Number: | SC9328 |
Additional Interfaces: | I²C, I²S, SPI, SSI, UART |
Supplier Device Package: | 225-MAPBGA (13x13) |
Package / Case: | 225-LFBGA |
Security Features: | -- |
Operating Temperature: | 0°C ~ 70°C (TA) |
Voltage - I/O: | 1.8V, 3.0V |
USB: | USB 1.x (1) |
SATA: | -- |
Series: | i.MXS |
Display & Interface Controllers: | LCD |
Graphics Acceleration: | No |
RAM Controllers: | SDRAM |
Co-Processors/DSP: | -- |
Speed: | 150MHz |
Number of Cores/Bus Width: | 1 Core, 32-Bit |
Core Processor: | ARM920T |
Part Status: | Obsolete |
Packaging: | Tray |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
SC9328MXSVP15 is designed for embedded applications, primarily in automation and intelligent control. Its microprocessor is a single-chip multi-core processor with high performance, low power consumption and low cost. It is widely used in industrial/automation control applications, including motion control, intelligent control, high-speed communication control, programmable logic controller (PLC) and communication control.
The core of the SC9328MXSVP15 is a 32-bit RISC (Reduced Instruction Set Computing) processor core, which is a highly optimized instruction set that enables executing software with high speed, low power consumption and low cost. The processor core contains four instruction encoding units, two function units, a Data/Address bus and a Control bus.
In addition, the SC9328MXSVP15 also includes on-chip peripherals such as two-level cache, interrupt controller, Direct Memory Access (DMA) controller, processor module and timer/counter. The SC9328MXSVP15 also has a programmable interrupt controller, which provides an interrupt priority mechanism to the processor that ensures that interrupts with higher priority can be served first. The processor also supports an on-chip instruction and data caches that reduce the amount of memory access and improve performance.
The SC9328MXSVP15 provides multiple industry-standard interfaces, including I2C, SPI, UART, Ethernet, CANBUS, USB and SDIO. Its I2C interface allows for communication with external devices such as sensors and actuators. The SPI interface is used to connect external devices such as memory chips, display chips and communication modules. The Ethernet interface provides the ability to connect to the Internet, while the USB and SDIOPort interfaces enable connection to external devices such as cameras and media players.
In addition to these peripherals, the SC9328MXSVP15 also provides features such as system-level fault analysis, built-in software self-test, and power saving modes. This makes it ideal for applications requiring extraordinary levels of reliability, such as industrial automation, robotics, and medical applications.
The working principle of the SC9328MXSVP15 is based on the principle of the Von Neumann architecture. In this architecture, instructions, data and the program counters are stored in the same memory. As instructions are fetched from the memory, they are performed by the processor in a sequential manner. Interrupts and exceptions can be used to break the sequence of instructions, allowing the processor to perform instructions in another order.
The SC9328MXSVP15 has a set of instructions and operations specifically designed to increase its performance and reduce power consumption. It is capable of executing instructions in parallel, which reduces power consumption and increases performance. In addition, the processors features hardware pipelining and branch prediction, which help reduce the amount of cycles required to complete an instruction.
In addition to these features, the SC9328MXSVP15 also has a high performance memory subsystem that provides access to programs, data and the instruction set. The processor also has on-chip debug and trace capabilities, which allow developers to easily diagnose and fix errors in their code. Additionally, the processor allows for software self-test, which is useful for ensuring it meets the requirements of its application.
The SC9328MXSVP15 is an advanced and highly versatile microprocessor, ideal for applications requiring high performance, low power consumption, and low cost. Its features, such as its Von Neumann architecture, memory subsystem, debug and trace capabilities and software self-test, make it a perfect choice for embedded applications in automation and intelligent control.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
SC9328MXSVP15 | NXP USA Inc | 0.0 $ | 1000 | IC MPU I.MXS 150MHZ 225BG... |
SC9301MLTRT | Semtech Corp... | -- | 1000 | IC REG BUCK ADJ 10A SYNC ... |
IC MPU MIPS-I 200MHZ 128QFPMIPS-I Microp...
IC MPU Q OR IQ 2.0GHZ 1295FCBGAPowerPC e...
IC MPU MPC85XX 1.0GHZ 783FCBGAPowerPC e5...
IC MPU MPC85XX 1.2GHZ 783FCBGAPowerPC e5...
IC MPU MPC85XX 1.0GHZ 783FCBGAPowerPC e5...
IC MPU I.MX25 400MHZ 400MAPBGAARM926EJ-S...