SCA630-EDCV1B-1 Sensors, Transducers

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Motion Sensors - Accelerometers

Accelerometers are used to measure acceleration and vibration in a variety of applications. In general, modern accelerometers measure linear acceleration, with gravitation as an inertial reference. They are often used for measuring vehicle acceleration, and as part of inertial navigation systems.

SCA630-EDCV1B-1 is a three-axis digital accelerometer for motion sensing applications. It is designed to accurately measure an acceleration range from ±2g up to ±62.5g. This accelerometer is a low-power, low-cost feature-rich and high-performance device, offering unique features such as signal output in either analog or digital formats and embedded temperature sensors.

The SCA630-EDCV1B-1 uses MEMS technology (micro-electro-mechanical systems) to measure linear acceleration. It is based on a multi-axis sensing element and an integrated microprocessor. The sensing element is a miniature cantilever beam with an accelerometer at the free end. CONV1 (Sense Element) is connected to an external microprocessor, which is pre-programmed with a software library of functions. It has a built-in temperature compensation for stability, as well as low drift and high accuracy.

The SCA630-EDCV1B-1 works by measuring the acceleration of the device in three orthogonal directions. This is done by the accelerometer sensing element, CONV1, which is located at the free end of the cantilever beam. The charging of the cantilever beam depends on the acceleration of the device in a given direction, which is measured by the sensing element. The sensing element then provides a feedback signal through the integrated microprocessor that is proportional to the acceleration on the device.

The output of the accelerometer is designed to be in analog or digital format. The output format can be selected by the user based on the application. The analog output voltage of the device ranges from +2V to -2V with ±2g to ±62.5g respectively. For digital output, it operates in I2C, SPI, and UART protocols. The resolution of the device can be programmed up to 12 bits.

The SCA630-EDCV1B-1 accelerometer is most commonly used for applications in automotive, navigation, communication, medical, and consumer electronics. It is ideal for automotive applications such as acceleration correction, roll/pitch sensing, traction control, and crash detection. This device is also used in navigation applications such as dead reckoning, orientation testing, alignment, tilt sensing, and dead-reckoning orientation updating. In consumer electronics, this device is used for motion recognition, gesture recognition, and gesture recognition control. This device can be also used for medical and industrial applications such as gauging vibration, shock analysis, vibration control, and shock detection.

The SCA630-EDCV1B-1 accelerometer is a small and reliable device for motion sensing applications. It uses MEMS technology for measuring linear acceleration and offers excellent performance with low power consumption. As it can be programmed to output analog or digital formats, it makes it very versatile for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference