SCBK6

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are semiconductor devices with two terminals, also known as a bridge rectifier. The two terminals of a diode are generally referred to as anode and cathode. A diode allows current to flow in one direction only. This makes them extremely useful in a number of electronic circuits, one of the most common being to create a full-wave rectified power supply.

The SCBK6 is a dual 60A single-phase bridge rectifier module designed to facilitate the distribution of power from a domestic or commercial power supply. It is part of a family of modules ranging from 30A to 120A. All modules make use of high temperature silicon diodes with a degree of insulation of 150 to 300V. It is designed so that the AC power from the mains is rectified and output as DC voltage.

The SCBK6 has two AC inputs, one labeled N and one labeled PE. The inputs are connected to a power supply usually between 208V and 253V. The inputs are broken up into two halves which are sent out as AC outpus, each phase with an amplitude of half the peak-to-peak AC voltage value. This creates two DC outputs labeled DC+ and DC-. The DC+ output is connected to a load, typically an inverter, while the DC- is connected to the ground.

The SCBK6 consists of four silicon power diodes connected in a bridge configuration. Each of the four diodes is mounted on an individual PCB. The diodes allow electrical current to flow in one direction while blocking it in the opposite direction, effectively rectifying the alternating current and leaving only a DC voltage.

The SCBK6 also contains a number of safety and protection features. The module is protected from overvoltage and over-temperature conditions. It also has built-in UV and reverse polarity protections. Additionally, it has active current limiting and current limitation capabilities.

The SCBK6 has a wide range of applications. It is used in many different types of electronic circuits ranging from automotive systems, to medical equipment and other industrial applications. It is particularly suited for use in solar power systems and battery banks, as it is capable of providing high current outputs in a very efficient manner. Thanks to its wide range of protections and safety features, the SCBK6 is ideally suited for use in harsh environments.

The specific data is subject to PDF, and the above content is for reference