SCHS2500

Series:	--
Packaging:	Bulk
Part Status:	Active
Diode Type:	Standard
Voltage - DC Reverse (Vr) (Max):	2500V
Current - Average Rectified (Io):	2A
Voltage - Forward (Vf) (Max) @ If:	3.45V @ 3A
Speed:	Standard Recovery >500ns, > 200mA (Io)
Reverse Recovery Time (trr):	2.5µs
Current - Reverse Leakage @ Vr:	1µA @ 2500V
Capacitance @ Vr, F:	--
Mounting Type:	Through Hole
Package / Case:	Axial
Supplier Device Package:	--
Operating Temperature - Junction:	-55°C ~ 150°C

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Diodes, also known as rectifiers, are a widely used electronic component in many devices. In general, they are used to convert AC power into DC power and are frequently used in the construction of power supplies, chargers and transformers. The SCHS2500 is a single diode device that can be used in either a circuit to provide power isolation and filtering, or in a rectifier circuit to convert AC power into DC power. This article looks at the application of the SCHS2500 and its working principle.

Application of the SCHS2500

The SCHS2500 is a static single diode based on silicon technology, with a reverse leakage current of 2.5mA and a forward voltage drop of 1.1 V. It has a wide range of applications, including power supplies, chargers, transformers, and applications requiring power isolation and filtering. In addition, the SCHS2500 can be used for wave form shaping, where it produces clipping, wave shaping, and wave flattening effects. The SCHS2500 is also suitable for a wide range of AC-to-DC power conversions. It can be used in ac-to-dc power converters for power supplies, battery chargers and other power management applications. Thanks to its wide operating range and low ON-resistance, the SCHS2500 is also suitable for power regulation and voltage regulation applications. The SCHS2500 is also suitable for high frequency switching applications, with a fast switch-on and switch-off time, allowing it to operate with minimal delay.

Working Principle

The SCHS2500 is a static single diode based on silicon technology. In a static single diode circuit, the junction between the semiconductor and metal layers acts as a diode, allowing current to flow in one direction only. The reverse leakage current of 2.5mA prevents higher voltage levels from passing through the diode, which is important for the efficient operation of many devices. In practical applications, the SCHS2500 can be used either as a power isolation and filtering device, or as a rectifier in an AC-to-DC power conversion system. In isolation and filtering applications, the SCHS2500 passes through lower current levels while blocking higher current levels. This prevents higher voltage spikes from entering the circuit and damaging the connected components. In rectification applications, the SCHS2500 allows only the positive half of the AC signal to pass through to the output side, thereby converting the alternating current into direct current. In addition, the SCHS2500 can also be used for wave form shaping, where it produces shaping, clipping and wave flattening effects on the input signal. This is often used in circuits to further adjust the shape of a signal before being applied to the load, such as adjusting the voltage levels in a higher voltage power supply.

Conclusion

The SCHS2500 is a static single diode based on silicon technology, with a reverse current leakage of 2.5mA and a forward voltage drop of 1.1 V. It can be used in a wide range of applications, such as power supplies, chargers, transformers, and power isolation and filtering devices. In addition, the SCHS2500 can also be used for AC-to-DC power conversions and wave form shaping. Thanks to its wide operating range and low ON-resistance, the SCHS2500 is also suitable for power regulation and voltage regulation applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description