DC Resistance (DCR):	103 mOhm Max
Height - Seated (Max):	0.118" (3.00mm)
Size / Dimension:	0.236" L x 0.236" W (6.00mm x 6.00mm)
Supplier Device Package:	--
Package / Case:	Nonstandard
Mounting Type:	Surface Mount
Inductance Frequency - Test:	100kHz
Operating Temperature:	-40°C ~ 125°C
Ratings:	--
Frequency - Self Resonant:	--
Q @ Freq:	--
Series:	SD6030
Shielding:	Shielded
Current - Saturation:	1.1A
Current Rating:	1.71A
Tolerance:	±30%
Inductance:	14.1µH
Material - Core:	Ferrite
Type:	Wirewound
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed Inductors

Inductors are electronic components that store energy in a magnetic field when current is passed through them. They are used in many areas including power delivery, signal filtering, and EMC and EMI shielding. Inductors come in two types: fixed inductors and adjustable inductors. Fixed inductors have a set value of inductance and usually require no further adjustment, while adjustable inductors allow the inductance to be adjusted for a specific application. The SD6030-150-R Fixed Inductor is a ferrite core molded part used to provide a high degree of inductance for a range of frequencies. This type of inductor is ideal for applications that require a fixed inductance, such as in power supplies, motor control circuits, overload protection circuits, and so on. The SD6030-150-R has an open core construction with a single loop of wire and is molded in black plastic with an operating temperature range of -20 to +80°C. The operating frequency range of the inductor is stated to be between 16kHz and 1.3MHz. Its approved safety standard is UL 94V-0. The inductor is characterized by a wide current saturation range and has low DC resistance with good temperature stability. The device works on the principle of Faraday’s law of induction, which states that a voltage, or electromotive force (emf), is generated in a circuit when a magnetic field is changing. The flux created by the flow of current through the inductor coil varies in direct proportion to the current, creating a voltage across the inductor. This voltage can be amplified or controlled by adding a resistor and capacitor in parallel with the inductor. The circuit, forming an “LC” resonant circuit, is used to create a high-frequency filtering of signals. High-frequency signals will pass more easily through the inductor while lower-frequency signals will be resisted due to the combined reactance of the inductor and resistor. The SD6030-150-R is widely used in applications such as voltage stabilization, voltage doubling, current limiting, motor controls, and other power supply designs. It can also be used to filter signals in applications such as amplifiers, audio circuits, and radio receivers. The SD6030-150-R is an ideal choice for inductor designs requiring stability, reliability, and efficiency.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description