SDHP10KS

Series:	--
Packaging:	Bulk
Part Status:	Active
Diode Configuration:	--
Diode Type:	--
Voltage - DC Reverse (Vr) (Max):	10000V
Current - Average Rectified (Io) (per Diode):	2.5A
Voltage - Forward (Vf) (Max) @ If:	12V @ 3A
Speed:	Standard Recovery >500ns, > 200mA (Io)
Reverse Recovery Time (trr):	2µs
Current - Reverse Leakage @ Vr:	1µA @ 10000V
Operating Temperature - Junction:	-55°C ~ 150°C
Mounting Type:	Through Hole
Package / Case:	Module
Supplier Device Package:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Diodes are basic components used in electronics and electrical engineering to control the flow of electrical current. Rectifiers are diodes that provide for unidirectional current flow, allowing for the conversion of alternating current to direct current. Diodes and rectifiers are used in a wide range of applications from power control, logic gates, and amplifiers to wave shaping and signal conditioning. In this article, we will discuss a specific application field and the working principle of solderless diode rectifier arrays, specifically the way they are used in the SDHP10KS.

The SDHP10KS Application Field

The SDHP10KS is a solderless bridge rectifier diodes used in applications where shock-proof, heat-resistant and corrosion-resistant rectifiers are needed. Specially designed for high-frequency applications, these bridge rectifiers diodes are commonly used in the automotive sector, computer accessories, commonly found in 12V and 24V applications, and in flat panel LCD and LED displays. The range of applications for the SDHP10KS is quite broad due to its high thermal performance and its high reverse surge current capability, making it perfect for use for high frequency AC-DC rectification in electronic circuits. SDHP10KS is often used in LED lighting applications, as it is suitable for rectifying high current and high voltage levels, as well as for power factor correction applications.

Working Principle

At the heart of the SDHP10KS is a diode array that consists of four soldered diodes arranged in a bridge configuration. This configuration enables the SDHP10KS to switch or convert alternating current (AC) to direct current (DC). In the large majority of applications, the two diodes on either side are forward biased, which allows current to flow through them. This opening of the bridge also prevents current flow through the two other diodes, which are reverse biased. When the voltage of the AC input is higher than DC output, the two forward biased diodes conduct the AC current, resulting in direct current output.In a nutshell, the working principle of the SDHP10KS can be explained as follows:1. The forward biased diodes in the diode array allow current to flow when the voltage of the AC input is higher than DC output.2. The reverse biased diodes prevent current flow.3. The SDHP10KS switches or converts alternating current (AC) to direct current (DC).

Conclusion

The SDHP10KS is a solderless bridge rectifier array that provides for unidirectional current flow and is used for a wide array of applications including automotive, computer, LED lighting, and flat panel LCD and LED displays. It is designed to be shock-proof, heat-resistant, and corrosion-resistant, and also capable of rectifying high current, high voltage levels, and power factor correction. The working principle of the SDHP10KS is based on four soldered diodes arranged in a bridge configuration, with the two diodes on either side being forward biased and allowing current to flow through them while the reverse biased diodes prevent current flow. When the voltage of the AC input is higher than DC output, the two forward biased diodes conduct the AC current, resulting in direct current output.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description