SF13GHR1G

Series:	Automotive, AEC-Q101
Packaging:	Tape & Reel (TR)
Part Status:	Active
Diode Type:	Standard
Voltage - DC Reverse (Vr) (Max):	150V
Current - Average Rectified (Io):	1A
Voltage - Forward (Vf) (Max) @ If:	950mV @ 1A
Speed:	Fast Recovery = 200mA (Io)
Reverse Recovery Time (trr):	35ns
Current - Reverse Leakage @ Vr:	5µA @ 150V
Capacitance @ Vr, F:	20pF @ 4V, 1MHz
Mounting Type:	Through Hole
Package / Case:	DO-204AL, DO-41, Axial
Supplier Device Package:	DO-204AL (DO-41)
Operating Temperature - Junction:	-55°C ~ 150°C

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Diodes are widely used in applications such as rectification, voltage regulation and signal formatting. Rectifier diodes are unidirectional electrical devices that allow current flow through them in only one direction. Single-direction diodes provide a full-wave rectification. The process of rectification converts an alternating current (AC) to direct current (DC). This is important in any circuit that requires direct current for applications such as power supplies and controlling motor speed. The SF13GHR1G is part of the range of rectifier diodes that are available today. It has a breakdown voltage of 13V and a forward current of 2A. It is suitable for use in a wide range of applications. This article will discuss the SF13GHR1G application field and working principle.

Working Principle

The working principle of the SF13GHR1G is simple. It is a diode that allows current to flow through it in only one direction. This is important for applications such as rectification and voltage regulation. The silicon material of the SF13GHR1G allows for effective charge flow through the device when a voltage is applied across the leads.When the positive lead of an AC voltage source is connected to the anode of the SF13GHR1G and the negative lead of the same voltage source is connected to the cathode of the diode, the diode blocks the negative charge from coming through. This means that only the positive half-cycles of the voltage source will be allowed to pass through the device. The other half of the AC signal will be blocked, resulting in a pulsed DC signal.When the opposite polarity is connected to the SF13GHR1G, the process is reversed and the diode will block the positive half of the signal while allowing the negative half of the signal to flow freely through the device. This process results in another pulsed DC form of the same AC signal.

Application Field

The SF13GHR1G is used in a variety of applications. It is commonly used for power supply and motor speed control. The high breakdown voltage and generous forward current rating make the SF13GHR1G a suitable device for most applications. One example of a common application of the SF13GHR1G is in voltage regulation. The device can be used to regulate a voltage output to a desired level by controlling the amount of current flowing through the device. By controlling the number of turns that the current passes through, the amount of voltage output can be adjusted to the desired level. This is done by selecting a resistor with the appropriate resistance for the desired level of output. The SF13GHR1G can be used to ensure that the voltage remains constant and that the current is not saturated. Another common application field of the SF13GHR1G is motor speed control. The device can be used to regulate the speed of a motor by controlling the number of turns it can rotate. This can be done by controlling the current through the device. In this case, the higher the current through the device, the higher the speed of the motor. The SF13GHR1G can also be used to ensure that the speed of the motor remains constant, even when the voltage across the motor varies. Finally, the SF13GHR1G can be used for signal formatting. By controlling the current through the device, the output can be adjusted for the desired signal format. This is done by selecting a resistor with the appropriate resistance for the desired signal format.

Conclusion

The SF13GHR1G is a single-direction diode that allows current flow through it in only one direction. It can be used for applications such as rectification, voltage regulation, motor speed control and signal formatting. It has a breakdown voltage of 13V and a forward current of 2A, making it suitable for a wide range of applications. Overall, the SF13GHR1G is a simple and reliable device that can be used in a variety of applications. Its good specifications make it suitable for most applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description