Allicdata Part #: | SGA-3586-ND |
Manufacturer Part#: |
SGA-3586 |
Price: | $ 0.57 |
Product Category: | RF/IF and RFID |
Manufacturer: | RFMD |
Short Description: | IC AMP HBT SIGE 5000MHZ SOT-86 |
More Detail: | RF Amplifier IC Cellular, GSM, PCS, UMTS 0Hz ~ 5GH... |
DataSheet: | SGA-3586 Datasheet/PDF |
Quantity: | 1000 |
3000 +: | $ 0.51881 |
Specifications
Series: | -- |
Packaging: | Tape & Reel (TR) |
Part Status: | Obsolete |
Frequency: | 0Hz ~ 5GHz |
P1dB: | 12.5dBm |
Gain: | 18dB ~ 22dB |
Noise Figure: | 3.5dB |
RF Type: | Cellular, GSM, PCS, UMTS |
Voltage - Supply: | 3 V ~ 3.5 V |
Current - Supply: | 31mA ~ 39mA |
Test Frequency: | 1.95GHz |
Package / Case: | SOT-86 |
Supplier Device Package: | SOT-86 |
Description
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
RF Amplifiers
An RF amplifier is an electronic amplifier specifically designed to amplify relatively weak signals in the radio frequency (RF) spectrum. Typical RF power amplifiers are designed to occupy a wide range of operating frequency bands, from ultra-low frequencies up to microwave frequencies. Among many popular RF amplifiers is the SGA-3586 model. This article discusses the application field and working principle of the SGA-3586.Application Field
The SGA-3586 amplifier is designed for use in a wide variety of applications. It is well suited for low-power wireless communication applications such as cordless phones, wireless local area networks (WLANs), cellular phones, and short-range radio systems. It can also be used in instrumentation, medical equipment, and positioning systems applications.Working Principle
The SGA-3586 amplifier follows the basic principles of RF amplification. In order to amplify a signal, it uses a pass transistor which acts as an impedance matching device between the source andload. The pass transistor is connected to two bias sources. One of these is the gate bias and the other is the emitter bias. By controlling the gate and emitter sources, the impedance of the pass transistor can be adjusted, which in turn, determines the power transfer and amplification of the RF signal.In order to maximize its performance, the SGA-3586 has a built-in temperature compensation circuit. This circuit monitors the temperature and adjusts the bias currents to keep the device in a constant and optimum operating condition.Power Output
The SGA-3586 amplifier is capable of delivering an output power of up to 5 watts, depending on the input signal level and the ambient temperature. That said, the amplifier\'s efficiency is quite high. At the maximum output power level, it has an efficiency of up to 94%, allowing for a low current draw.Input Characteristics
The SGA-3586 amplifier has an input impedance of 50 ohms and a voltage standing wave ratio (VSWR) of less than 1.5:1. It also includes two-stage input tuning which allows for a wide input matching range and improved signal-to-noise ratio.Conclusion
The SGA-3586 is a powerful and versatile amplifier that is well suited for many different wireless communication applications. It has a high efficiency, wide input matching range, and it can deliver up to 5 watts of output power. Its temperature compensating circuit ensures optimal performance in a wider temperature range.The specific data is subject to PDF, and the above content is for reference
Latest Products
HMC667LP2
IC MMIC AMP LNA PHEMT 6-DFNRF Amplifier ...
TQM7M9023H
MODULE GSMRF Amplifier IC CDMA, GSM, EDG...
HMC406MS8GTR
IC PWR AMP HBT INGAP 8-MSOPRF Amplifier ...
ALM-GP003-BLKG
MOD LNA GPS FRONT END 9MCOBRF Amplifier ...
PTMA210452EL V1 R250
IC AMP RF LDMOS 45W H33265-8RF Amplifier...
MGA-30116-BLKG
IC RF AMP 0.5W PA 1GHZ 16QFNRF Amplifier...